Abstract:Electrochemical energy storage (EES) is still key to realize wide spread use of renewable energies. For large-scale EES production, the development of high energy density, non-toxic, cost-effective materials is necessary. In this study, a cobalt free active material, Lithium Nickel Manganese Oxide, LiNi0.5Mn1.5O4 (LNMO), was employed in the production of cathodes for high voltage lithium ion battery (LIB) applications. LNMO is an attractive cathode active material due to its high operating potential (~4.7 vs. Li/Li+ [1]), non-toxicity and low cost. The practical application of LNMO cathodes in LIBs has been relatively limited, especially for large scale application, due challenges associated with the material (i.e. electrolyte decomposition at high voltage, self-discharge and dissolution of the transition metals [2]). Electrolyte additives are an effective way to address these challenges, without major cost increase or changes to the production approach. In this study the role of different electrolyte additives in high-voltage full-cell LIBs with both graphite and silicon-graphite anodes is investigated. Additives known for their solid electrolyte interphase (SEI) forming ability (i.e. vinylene carbonate (VC) and fluoroethylene carbonate (FEC)), as well as additives that play additional roles such as cathode electrolyte interface formation or HF scavenging (i.e. tris(trimethylsilyl) phosphite (TMSP) and succinate anhydride (SA)), are used [3]. Galvanostatic cycling measurements were performed in 3-electrode cells in order to investigate the rate capability and long term cycling stability of LMNO/Gr and LMNO/Gr-Si full-cells with different electrolyte additives. The electrochemical characterization was verified with post mortem analysis to confirm the SEI composition, chemical and mechanical stability of the electrodes and lack of lithium plating. Post mortem investigations were done with Raman spectroscopy, scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDX) and optical microscopy. Improved rate performance and better long term cycling stability of both full-cell chemistries was achieved for electrolytes containing the TMSP additive. References: [1] G. Gabrielli, M. Marinaro, M. Mancini, P. Axmann and M. Wohlfahrt-Mehrens, J. Power Sources 351 (2017) 35-44. [2] R. Amin, N. Muralidharan, R. K. Petla, H. Ben Yahia, S. A. Jassim Al-Hail, R. Essehli, C. Daniel, M. A. Khaleel, I. Belharouak, J. Power Sources, 467 (2020) 228318. [3] K. Kim, H. Ma, S. Park, N.-S. Choi, ACS Energy Lett., 5 (2020) 1537-1553.

Improving the Cycling Performance of High-Voltage NMC111 || Graphite Lithium Ion Cells by an Effective Urea-Based Electrolyte Additive

Improved Cycling Performance and Safety Characteristics of NMC811/G-Si Battery Cells with an Optimised Electrolyte Formulation

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Tuning interface stability of nickel-rich LiNi0.9Co0.05Mn0.05O2 cathode via a novel bis(vinylsulphonyl)methane additive

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Improved Cycling of Li||NMC811 Batteries under Practical Conditions by a Localized High-Concentration Electrolyte

Enhanced Cycling Performance of Ni-Rich Positive Electrodes (NMC) in Li-Ion Batteries by Reducing Electrolyte Free-Solvent Activity

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Modifying the Cathode–Electrolyte Interphase by Sulfone-Based Additive to Enhance the Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries

Engineering an Insoluble Cathode Electrolyte Interphase Enabling High Performance NCM811//Graphite Pouch Cell at 60 °C

Graphitic carbon nitride (g-C3N4) as an electrolyte additive boosts fast-charging and stable cycling of graphite anodes for Li-ion batteries

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

Extending the High-Voltage Operation of Graphite/NCM811 Cells by Constructing a Robust Electrode/electrolyte Interphase Layer

Delicately Designed Cyano‐Siloxane As Multifunctional Additive Enabling High Voltage LiNi0.9Co0.05Mn0.05O2/Graphite Full Cell with Long Cycle Life at 50 °C

A Facile Method of Improving the High Rate Cycling Performance of LiNi1/3Co1/3Mn1/3O2 Cathode Material

An Interphase Engineering Method of Stabilizing Ni‐rich Cathode in Lithium‐ion Batteries by A Nucleophilic‐based Additive

Interface modification in high voltage spinel lithium-ion battery by using N-methylpyrrole as an electrolyte additive

Interphase Engineering for Stabilizing Ni-Rich Cathode in Lithium-Ion Batteries by a Nucleophilic Reaction-Based Additive.

Isocyanoethyl Methacrylate (IMA) As a Bifunctional Electrolyte Additive for LiNi0.8Co0.1Mn0.1O2/Graphite Batteries with Enhanced Performance

Effective Strategies for Improving the Cycle Life of Ni-Rich LiNixMnyCozO2 Cathodes for Lithium-Ion Batteries