Abstract:Significant endeavours have been undertaken to advance the development of eco-friendly, abundant, cost-effective, and high-performance cathode materials for lithium-ion batteries. Among the various contenders for next-generation energy storage systems, spinel LiNi 0.5 Mn 1.5 O 4 has emerged as a leading high-voltage cathode candidate, owing to its aforementioned benefits. Nonetheless, the widespread adoption of LNMO-based lithium-ion batteries is substantially impeded by the electrochemical instability of conventional carbonate electrolytes above 4.5 V. High-voltage cycling of such batteries results in rapid capacity degradation and metal-ion dissolution from the LNMO electrode into the electrolyte, particularly at elevated temperatures, further causing deposition of metal-ions on anode electrode. Therefore, stabilizing the electrode/electrolyte interface is crucial to achieve improved electrochemical performance of the Li-ion cell at high voltages. The utilization of sacrificial electrolyte additives is regarded as a straightforward and efficacious method to accomplish this objective. These additives form a protective layer on the cathode surface, mitigating electrolyte decomposition and transition metal-ion dissolution and deposition on anode’s surface. Various additives facilitating high-voltage cathode materials have been documented, encompassing fluorides and sulfonates. However, borate salt-containing additives are particularly promising within this context. In the present study, we endeavour to elucidate the surface modifications transpiring on the electrode’s surface when minute quantities of borate-based salt are employed as an additive in the conventional EC:EMC electrolyte for high-voltage operation. We explored the impact of the additive salt in a standard LiPF 6 -EC/EMC base electrolyte on the discharge capacity and rate performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite based Li-ion cell. The electrochemical behaviour, morphological behaviour, and electrode-electrolyte interphase layer stability on the electrode were meticulously examined using high-resolution transmission electron microscopy (HR-TEM), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). These characterisations conformed the presence of an electrode-electrolyte interface forming a thin-layer via the sacrificial decomposition of the utilised additive. The introduction of this salt exhibits favourable effects on enhancing the electrochemical performance of the LiNi 0.5 Mn 1.5 O 4 /Graphite in high-voltage lithium-ion batteries. Notably, the utilised additive excels in mitigating irreversible capacity loss and reducing cycling fade, as it preferentially decomposes and forms a conductive, protective film that impedes subsequent electrolyte decomposition, thereby substantially enhancing cell performance.

Dual Role of Bis(borate) Additive in Electrode/Electrolyte Interface Layer Construction for High-Voltage NCM 523 Cathode

Dimethyl Sulfide Electrolyte Additive Enabled High-Voltage Lithium-Ion Battery

Synergistic Dual-Additive Regulated Carbonate Electrolyte Stabilizes Bidirectional Interface for Aggressive Ni-rich Li-metal Full Batteries

Trimethoxyboroxine As an Electrolyte Additive to Enhance the 4.5 V Cycling Performance of a Ni-rich Layered Oxide Cathode

Synergy Effect of Trimethyl Borate on Protecting High-Voltage Cathode Materials in Dual-Additive Electrolytes

Improving interfacial stability of ultrahigh-voltage lithium metal batteries with single-crystal Ni-rich cathode via a multifunctional additive strategy

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Revolutionizing multifunctional electrolyte additive design and synthesis for high-voltage nickel-rich batteries in diverse climates

Tris(pentafluoro)phenylborane electrolyte additive regulates the highly stable and uniform CEI membrane components to improve the high-voltage behaviors of NCM811 lithium-ion batteries

Triallyl Borate as an Effective Separator/Cathode Interphase Modifier for Lithium-ion Batteries

A New Anion Receptor for Improving the Interface Between Lithium- and Manganese-Rich Layered Oxide Cathode and the Electrolyte

Constructing a Low-Impedance Interface on a High-Voltage LiNi0.8Co0.1Mn0.1O2 Cathode with 2,4,6-Triphenyl Boroxine as a Film-Forming Electrolyte Additive for Li-Ion Batteries

Synergistic interphase modification with dual electrolyte additives to boost cycle stability of high nickel cathode for all-climate battery

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Synchronous dual additives to boost multiphase interface stability of high-voltage Li-rich Mn-based batteries

A bicomponent electrolyte additive towards stabilized interface for high-performance lithium-ion batteries

Multifunctional Electrolyte Additive Stabilizes Electrode–Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

Anionic Additive-Integrated Electrolyte Therapy: Enhancing High-Voltage Stability and Performance in Lithium-Ion Batteries

Conductive Robust Interfaces with Fluoro-Borate Based Electrolyte Additive for 4.6 V Well-Cycled LiNi0.90Co0.06Mn0.04O2||Li Batteries

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive