Abstract:Copper compound-rich films and coatings are effective against widespread viruses and bacteria. Even though the killing mechanisms are still debated it is agreed that the metal ion, nanoparticle release, and surface effects are of paramount importance in the antiviral and antibacterial efficacy of the surfaces. In this work we have investigated the behaviour of the reactive magnetron sputtered nanocomposite diamond-like carbon thin films with copper nanoparticles (DLC:Cu). The films were etched employing oxygen plasma and/or exposed to ultra-pure water aiming to investigate the differences of the Cu release in the medium and changes in film morphology. The presence of metallic copper and Cu O phases were confirmed by multiple analytical methods. Pristine films were more effective in the Cu release reaching up to 1.3 mg/L/cm concentration. Plasma processing resulted in the oxidation of the films which released less Cu but after exposure to water, their average roughness increased more, up to 5.5 nm. Pristine and O plasma processed DLC:Cu films were effective against both model coronavirus and herpesvirus after 1-hour contact time and reached virus reduction up to 2.23 and 1.63 log , respectively. Pristine DLC:Cu films were more effective than plasma-processed ones against herpesvirus, while less expressed difference was found for coronavirus. The virucidal efficacy over up to 24 h exposures in the aqueous medium was validated. A bactericidal study confirmed that pristine DLC:Cu films were effective against gram-negative and gram-positive bacteria. After 3 hours 100% antibacterial efficiency (ABE) was obtained for and 99.97% for . After 8 hours and longer exposures, 100% ABE was reached. The half-life inactivation of viruses was 8.10 – 11.08 minutes and for 15.1 – 72.2 minutes.

Hydrogen-Free Diamond Like Carbon Films with Embedded Cu Nanoparticles: Structure, Composition and Reverse Saturable Absorption Effect

Structure and Optical Properties of Cu-DLC Composite Films Deposited by Cathode Arc with Double-Excitation Source

A Comparative Study of Copper-doped and Copper, Nitrogen Co-doped DLC Film Electrode and Its Electrochemical Properties

Diamond-like Carbon (DLC) Films Deposited on Copper Substrate Through Preparation of Intermediate Layers

Structural properties and surface wettability of Cu-containing diamond-like carbon films prepared by a hybrid linear ion beam deposition technique

Effects of Copper Interlayer and Annealing on Structure and Mechanical Properties of Diamond-Like Carbon Films by Cathode Arc Evaporation

Surface and Electron Emission Properties of Hydrogen-Free Diamond-Like Carbon Films Investigated by Atomic Force Microscopy

Structure and Mechanical Properties of (cu, Ti) - Binary Metal Doped Diamond-Like Carbon Films

Antiviral and Antibacterial Efficacy of Nanocomposite Amorphous Carbon Films with Copper Nanoparticles

Structure and Mechanical Properties of Diamond-Like Carbon Films with Copper Functional Layer by Cathode Arc Evaporation

Electrodeposition, microstructure, friction and electrochemical behavior of diamond-like carbon (DLC) films with Ni/Cu interlayer

Hydrogen-Free Carbon Thin Films Prepared by Unbalanced Magnetron Sputtering

Comparative Study on Structure and Wetting Properties of Diamond-Like Carbon Films by W and Cu Doping

Studies of Diamond-like Carbon Films Deposited on Copper Substrate With Ti/TiC and Si/SixNy Intermediate Layers

Characteristics of Titanium-Doped Diamond-Like Carbon Films Deposited by Unbalanced Magnetron Sputtering

Optical Characterization of Hydrogen-Free CeO2 Doped DLC Films Deposited by Unbalanced Magnetron Sputtering

Microstructure and Mechanical Properties of Cu-Containing Amorphous Carbon Nanocomposite Thin Films by A Hybrid Deposition Technique

Large-area Uniform Hydrogen-Free Diamond-Like Carbon Films Prepared by Unbalanced Magnetron Sputtering for Infrared Anti-Reflection Coatings

Synergistic Effect of Cu/Cr Co-Doping on the Wettability and Mechanical Properties of Diamond-Like Carbon Films

Stress Reduction Mechanism of Diamond-Like Carbon Films Incorporated with Different Cu Contents

Formation of Rod-Shaped Wear Debris and the Graphitization Tendency of Cu-doped Hydrogenated Diamond-Like Carbon Films