Abstract:We report here a detailed characterization of the surface chemical states and morphology of polyimide (PI) films following modifications by plasma treatment and electroless copper deposition. NH3 and Ar plasma treatments have been successfully used to achieve morphological and chemical modification of the PI surface so that electroless copper plating can occur. The adhesion strength of the electroless copper to the PI surface was measured and correlated with the plasma-induced chemical and physical modifications of the PI surface. The NH3 plasma causes primarily chemical changes to the PI surface through creation of nitrogen moieties (i.e., –N =C< ) on the surface. The Ar plasma treatment brings about mainly physical changes to the surface (i.e., surface roughening). The combined-plasma treatment (Ar plasma followed by NH3 plasma) combines the desirable chemical and physical effects of each treatment, yielding a PI surface with higher roughness for physical anchoring of the copper and surface bonding sites (nitrogen and oxygen sites). During the electroless copper surface activation step with tin chloride and palladium chloride, tin bonds mainly with the oxygen on the surface, whereas palladium reacts with tin chloride as well as with the surface nitrogen. A direct relationship has been observed between surface palladium concentration and the abundance of the –N =C< sites on the surface. This suggests that the nitrogen radicals created during the NH3 plasma are incorporated into the surface and serve as bonding sites for the palladium. In the subsequent electroless Cu deposition, there was a direct correlation between the palladium surface concentration and Cu coverage. The adhesion strength of the electroless copper to the PI correlated well to the surface modifications and plasma treatment conditions. For the first time, a specific bonding configuration on the PI surface is shown to promote adsorption of palladium, which in turn promotes covalent bonding with Cu. The relative importance of surface roughness and chemical bonding on the adhesion strength is discussed.

Effect of Silver Nitrate on Electroless Copper Plating on the Surface of Polyimide Film

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Preparation of surface bound silver nanoparticles on polyimide by surface modification method and its application on electroless metal deposition

Research of Electroless Ni-P Alloy Plating on Polyimide Substrate

Copper Metallization on the Surface-Modified Polyimide Films by Electroless Plating Method

Direct additive copper plating on polyimide surface with silver ammonia via plasma modification

Plasma Treatment and Surface Analysis of Polyimide Films for Electroless Copper Buildup Process

Electroless Plating of Copper on Fluorinated Polyimide Films Modified by Plasma Graft Copolymerization and UV‐induced Graft Copolymerization with 4‐Vinylpyridine

Laser-induced site-selective silver seeding on polyimide for electroless copper plating

Reflective and conductive surface-silvered polyimide films prepared by surface graft copolymerization and electroless plating

Modification of Cu Nanoparticles with A Disulfide for Polyimide Metallization

A Facile Method for Preparing Highly Conductive and Reflective Surface-Silvered Polyimide Films

Molecular Self-Assembly Combined with Electroless Copper Plating of Laser-Induced Patterning on Polyimide Film

Selective Silver Seeding on Laser Modified Polyimide for Electroless Copper Plating

Effect of Nitrogen-containing Groups on the Reduction of Copper Ions: in Situ Raman and AIMD

Preparation of Highly Reflective and Conductive Metallized Polyimide Films Through Surface Modification: Processing, Morphology and Properties

Conductive silver coatings with ultra-low silver consumption on polyimide film via a mild surface ion exchange self-metallization method

Adhesion Properties of Electroplating Process Between Polyimide and Metal Layer for Polymer/Metal Hybrid Bonding

Effect of Flake Silver-Plated Copper Particles on the Property Enhancement of Electrically Conductive Adhesives.

Silver Nanoparticle Catalyst for Electroless Ni Deposition and the Promotion of Its Adsorption Onto PET Substrate

Direct Surface In-Situ Activation for Electroless Deposition of Robust Conductive Copper Patterns on Polyimide Film