Abstract:In this study, a method was developed to immobilize silver onto polypropylene (PP) membrane surfaces for improved anti-biofouling performance. A commercial PP membrane was first grafted with the thiol functional groups, and then silver ions were immobilized onto the PP membrane surface through coordinating with the thiol groups. The immobilized silver was found to be very stable, with only similar to 1.1% of the immobilized silver being leached out during a leaching test. The surface of the modified membrane (PPS-Ag) was examined with ATR-FTIR and XPS analysis, which verified the successful grafting of the thiol groups and the coordination of silver ions on the membrane surface. The surface properties of the membrane were also characterized by SEM, AFM and water contact angle measurements. The PPS-Ag membrane was found to have a smoother and more hydrophilic surface than the PP membrane. Both Gram-negative bacteria, Escherichia coli, and Gram-positive bacteria, Staphylococcus aureus, were used to evaluate the antibacterial and anti-biofouling performance of the PPS-Ag membrane. From disk diffusion experiments, the PPS-Ag membrane exhibited the capability of inhibiting the growth of both the Gram-negative and Gram-positive bacteria tested. The anti-biofouling performance of the membrane was assessed by immersion in a mixed suspension of E. coli and S. aureus and filtration tests. The PPS-Ag membrane showed a stable and significantly enhanced anti-biofouling performance as compared with the PP membrane. The results in this study demonstrate that biofouling of a PP membrane can be sufficiently overcome through immobilizing silver onto the membrane surface.

Direct Ion Exchange Self‐Metallization: A Novel and Efficient Route for the Preparation of Double‐Surface‐Silvered Polyimide Films

Preparation of Highly Reflective and Conductive Metallized Polyimide Films Through Surface Modification: Processing, Morphology and Properties

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

Preparation of Electrically Conductive Polyimide/Silver Composite Fibers Via In-Situ Surface Treatment

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Fabrication of Polyimide Composite Film with Both Magnetic and Surface Conductive Properties

Fabrication of Surface Silvered Polyimide/iron Oxide Composite Films with Both Superparamagnetism and Electrical Conductivity

Direct additive copper plating on polyimide surface with silver ammonia via plasma modification

The chemistry involved in the loading of silver(I) into poly(amic acid) via ion exchange: A metal-ion-induced crosslinking behavior

Imprinting Of Metal Receptors Into Multilayer Polyelectrolyte Films: Fabrication And Applications In Marine Antifouling

Synthesis and Characterization of Biphenyl Polyimide Containing Alkyl Sulfide Structure

Mesoporous polyetherimide thin films via hydrolysis of polylactide-b-polyetherimide-b-polylactide

Immobilization of Silver in Polypropylene Membrane for Anti-Biofouling Performance

Super-high interface adhesion through silver/polyimide heterojunction

Realization of electromagnetic shielding performance for polyimide-matrix composite by self-metallization

Solvent Resistant Self-Crosslinked Poly(ether Imide)

Copper Metallization on the Surface-Modified Polyimide Films by Electroless Plating Method

Elaboration of the recently created SiPPyAg architecture grounded in semiconductor

High Dielectric Permittivity Silver/Polyimide Composite Films with Excellent Thermal Stability

Effect of Silver Nitrate on Electroless Copper Plating on the Surface of Polyimide Film

Novel Sulfonated Polyimides Proton-Exchange Membranes Via a Facile Polyacylation Approach of Imide Monomers