Abstract:We report here a detailed characterization of the surface chemical states and morphology of polyimide (PI) films following modifications by plasma treatment and electroless copper deposition. NH3 and Ar plasma treatments have been successfully used to achieve morphological and chemical modification of the PI surface so that electroless copper plating can occur. The adhesion strength of the electroless copper to the PI surface was measured and correlated with the plasma-induced chemical and physical modifications of the PI surface. The NH3 plasma causes primarily chemical changes to the PI surface through creation of nitrogen moieties (i.e., –N =C< ) on the surface. The Ar plasma treatment brings about mainly physical changes to the surface (i.e., surface roughening). The combined-plasma treatment (Ar plasma followed by NH3 plasma) combines the desirable chemical and physical effects of each treatment, yielding a PI surface with higher roughness for physical anchoring of the copper and surface bonding sites (nitrogen and oxygen sites). During the electroless copper surface activation step with tin chloride and palladium chloride, tin bonds mainly with the oxygen on the surface, whereas palladium reacts with tin chloride as well as with the surface nitrogen. A direct relationship has been observed between surface palladium concentration and the abundance of the –N =C< sites on the surface. This suggests that the nitrogen radicals created during the NH3 plasma are incorporated into the surface and serve as bonding sites for the palladium. In the subsequent electroless Cu deposition, there was a direct correlation between the palladium surface concentration and Cu coverage. The adhesion strength of the electroless copper to the PI correlated well to the surface modifications and plasma treatment conditions. For the first time, a specific bonding configuration on the PI surface is shown to promote adsorption of palladium, which in turn promotes covalent bonding with Cu. The relative importance of surface roughness and chemical bonding on the adhesion strength is discussed.

Electroless Plating of Copper on Fluorinated Polyimide Films Modified by Plasma Graft Copolymerization and UV‐induced Graft Copolymerization with 4‐Vinylpyridine

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Controlled Grafting Of Well-Defined Functional Polymers On Hydrogen-Terminated Silicon Substrates: Relevance To Adhesion Of Electrolessly-Deposited Copper

Plasma Treatment and Surface Analysis of Polyimide Films for Electroless Copper Buildup Process

Grafting Amino Groups onto Polyimide Films in Flexible Copper-Clad Laminates Using Helicon Plasma

Surface Graft Copolymerization Enhanced Adhesion of an Epoxy-Based Printed Circuit Board Substrate (Fr-4) to Copper

Copper Metallization on the Surface-Modified Polyimide Films by Electroless Plating Method

Exploiting the Combination of Displacement and Chemical Plating for a Tailored Electroless Deposition of Palladium Films on Copper

Plasma surface pretreatment to improve interfacial adhesion strengths of sputtered Cu on polyimide film

Study of electroless copper plating onto PVDF modified by radio frequency plasma treatment

Direct additive copper plating on polyimide surface with silver ammonia via plasma modification

Plasma-Modified PI Substrate for Highly Reliable Laser-Sintered Copper Films Using Cu2O Nanoparticles

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Modification of Cu Nanoparticles with A Disulfide for Polyimide Metallization

Photocatalytic Surface Modification of PI Film for Electroless Copper Plating

Adhesion Improvement of Polytetrafluoroethylene/metal Interface by Graft Copolymerization

PET Surface Modification with Inkjet-Printing Pd 2+ /Epoxy Resin Solution for Selective Electroless Copper Plating

Selective‐area electroless copper plating on polyimide employing laser patterning of a catalytic film

Polydopamine/Silane Composite Coating on Electrolytic Copper Foil as Epoxy Adhesion Promoter and Corrosion Inhibitor

Enhancing the bond strength of magnetron-sputtered copper layers on polyimide and polyether ether ketone surfaces through surface modification

Characterization and mechanical testing of polydopamine-adhered electroless copper films