Abstract:PTFE adheres poorly to other materials due to its low surface energy and chemical inertness,which leads to failure of PTFE in many industrial applications.To spread the applications,numerous methods for surface modification have been developed to activate the PTFE surface for improving its wettability and adhesion ability.This study focused on the surface modification of expanded poly(tetrafluoroethylene)(ePTFE)film by a two-step process based on low-pressure plasma treatment followed by acrylic acid(AAc)graft copolymerization.The influences of different plasma treatments and graft copolymerization conditions on the hydrophilicity of film surface were studied.The wettability of the ePTFE film surface was determined by water contact angle,and the surface elemental compositions and the type of functional groups on the surface of the treated ePTFE samples were evaluated by X-ray photoelectron spectroscopy(XPS).The results indicated that the contact angle of ePTFE film declined from 145° to 102° when it was only treated by plasma treatment.After AAc grafted copolymerization,the contact angle decreased further to a smaller value.And the wettability of the film was improved obviously and kept constant.The condition of plasma treatment was He,100 W,90 s.The condition of AAc graft copolymerization was 30%(vol.),70℃,3 h.XPS analysis showed that the element ratio of F/C declined from 1.960 to 0.853,while the element ratio of O/C rose from 0 to 0.147.The result indicated that plasma treatment could greatly change the surface chemistry as well as morphology of ePTFE films.The surface roughness increased with plasma treatment time.From XPS measurements,it could be seen that the polar hydrophilic groups had been successfully grafted onto the ePTFE surface.The inert fluorine elements were partly replaced by oxygen polar groups,which was the fundamental reason for the improvement of hydrophilicity of ePTFE film.

Adhesion Improvement of Polytetrafluoroethylene/metal Interface by Graft Copolymerization

Modification of Poly(tetrafluoroethylene) and Gold Surfaces by Thermal Graft Copolymerization for Adhesion Improvement

Surface Modification of Poly(Tetrafluoroethylene) Films by Graft Copolymerization for Adhesion Improvement with Sputtered In-Sn Oxides

Effects of Polymer Architecture and Composition on the Adhesion of Poly(tetrafluoroethylene)

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Controlled Grafting of Comb Copolymer Brushes on Poly(tetrafluoroethylene) Films by Surface-Initiated Living Radical Polymerizations.

Femtosecond laser texturing assisted cold plasma hydrophilization of polytetrafluoroethylene surface

Surface Modification and Adhesion Improvement of Expanded Poly(tetrafluoroethylene) Films by Plasma Graft Polymerization

Ar Plasma-induced Graft Polymerization of Acrylic Acid Onto PTFE Films

Study on the surface modification and the adhesion performance of Polytetrafluoroethylene

Thermal Graft Copolymerization-Induced Adhesion Improvement of a FR-4®/PETG® Laminate

Electroless Plating of Copper on Polytetrafluoroethylene Films Modified by Surface-Initiated Free Radical Polymerization of 4-Vinylpyridine

Thermal imidization of poly(amic acid) precursors on surface-modified poly(tetrafluoroethylene) films via graft copolymerization with glycidyl methacrylate

Surface Modification Of Poly (Tetrafluoroethylene) Function Materials By Plasma-Induced Graft Copolymerization Of Acrylic Acid

Surface modification of low temperature plasma-pretreated ePTFE film by AAc graft copolymerization

Study on the adhesion of PTFE/PI composite films by interlocking synergistic effects

The Modification of PTFE Films Grafted Acrylic Acid with Ar Plasma

Surface modification of polytetrafluoroethylene (PTFE) fibers through methyl methacrylate (MMA) polymerization for self-lubricating composites

Adhesive-free adhesion between heat-assisted plasma-treated fluoropolymers (PTFE, PFA) and plasma-jet-treated polydimethylsiloxane (PDMS) and its application

Graft Polymerization of Acrylic Acid on A Polytetrafluoroethylene Panel by an Inductively Coupled Plasma