Abstract:This work deals with the lunar sample return project, which requires lunar samples to be returned back to the ground without contamination. In this paper, a knife edge indium seal is proposed as a primary sealing form, where indium–silver alloy is welded into an annular groove of a cylindrical container firstly and then extruded by an annular knife edge of a cylindrical lid. The analysis of the leakage and sealing reliability of knife edge indium seal is the main aim of this paper. Firstly, the pretreatment of knife edge indium seal is discussed. Key techniques on indium welding are studied to evaluate its sealing reliability, with the tensile strength and welding void ratio mainly being discussed. Secondly, by means of “Roth” leakage theory, mathematical models on the leak rate for knife edge seal are established. By means of the finite element analysis, the knife edge geometry is optimized with minimum pressing force required. The results justify that the knife edge seal demands much lower pressing force to achieve a considerable sealing performance, which is suitable for low-powered operation. Finally, the ground tests are carried out to evaluate the feasibility of the indium welding and to measure the leak rate of the knife edge indium seal. Experimental results demonstrate the indium welding onto the stainless steel container is feasible, and the leak rate at room temperature is 3.0 × 10−10 Pa·m3/s, which is much lower than the rubber O-type ring seal. The knife edge indium seal is suitable for lunar sample return devices.

Spacecraft hatch leak testing

Research on Improving the System Sensitivity for Hot Helium Leak Test

Leak Detection Design for ITER GIS Gas Fueling Manifold

Dynamic Leakage Test of a Voluminous Container Using SF6 Gaseous Tracer

A Deep-Sea Large-Volume High-Pressure Simulation System—design, Analysis and Experimental Verification

Hot Helium Leak Test of ITER Blanket Shield Block

Research on Sealing Structure and Ground Test of Lunar Sample Return Devices

Research on the Total Leakage Rate Leak Detection Technology of the Large Spacecraft

Testing Machine for Testing Durability of Material under High-Pressure Hydrogen Circumstance

Leakage Analysis and Ground Tests of Knife Edge Indium Seal to Lunar Sample Return Devices

China's Progress on Hot Helium Leak Test of ITER Shield Blocks

Study on in situ mass spectrometry leak detection technique of working fluid in spacecraft electric propulsion system

Ultrasensitive Leak Detection During Ultrahigh Vacuum Evacuation by Quadrupole Mass Spectrometer

Simulation Analysis of Outboard Gas Status for Spacecraft Gas Leakage In-Orbit

Leak tightness tests of mechanical seal joints for HL-2M tokamak under thermal cycle loads

Ground Simulation of Leak Detection and Localization of Space Station with Direction Gauge

Research on Opening and Closing Synchronization of Flexible Hatch on Space Shuttle.

Seal performance analysis and lifetime evaluation of capsule plugging glue

A Dual-Function Leak Detector for Mems Devices

Numerical simulation of gas leakage in manned spacecraft cabin

Leakage Tests of the Stainless Steel Vessels of the Antineutrino Detectors in the Daya Bay Reactor Neutrino Experiment