Abstract:Purpose - The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process. Design/methodology/approach - Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization. Findings - Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance. Practical implications - This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components. Originality/value - This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.

Research on Opening and Closing Synchronization of Flexible Hatch on Space Shuttle.

Deployment analysis of deployable space panel and shell structure

Shimming Design and Optimal Selection for Non-Uniform Gaps in Wing Assembly

Parametric Finite Element Analysis Of Output Displacement Affected By Machining Errors Of Flexure Hinge Mechanism

Development of a highly synchronized deployment space mast

Finite Element Analysis of Displacement Performances of Flexure Hinge Mechanism Affected by Machining Errors

Dynamics Numerical Analysis of Space Deployable Mechanism with Three-Dimensional Clearance Revolute Joint

An Assembly Gap Control Method Based on Posture Alignment of Wing Panels in Aircraft Assembly

Research on Sealing Assembly and Adjustment Method of Assembled Cabin Door of Space Station

Development and Overview of Space Docking Mechanism

Dynamics Modeling and Simulation of Deployable Mechanism with Double Clearance

Effects of damping, friction, gravity, and flexibility on the dynamic performance of a deployable mechanism with clearance

Research into the Integrative Application of Damped Flexible Connector in Spacecraft Structures

ADVANCES IN STUDY ON JOINT BEHAVIOR OF CLAMP BAND AND DYNAMICS OF SPACECRAFT-LAUNCH VEHICLE-CLAMP BAND COUPLING SYSTEM

A Framework for Rapidly Predicting the Dynamics of Flexible Solar Arrays in the China Space Station with a Verification Based on On-Orbit Measurement Data

Design of Docking Interfaces for On-Orbit Assembly of Large Structures in Space

Design and analysis of a new capture mechanism for space docking

Capture Dynamics Modeling and Simulation of the Space Flexible Manipulator.

Optimizing deployment dynamics of composite tape-spring hinges

Optimization of the Motion Control Mechanism of the Hatch Door of Airliner

Finite Element Analysis of Displacement Accuracy of Single-notch Right Circular Flexure Hinge