Abstract:The buckling of compression members in space structures leads to the local collapse or even progressive collapse of structures. This paper proposed an assembled outer sleeve to reinforce the compression member of space structures by restraining its buckling. The assembled outer sleeve was composed of two identical semicircular anchor plates using high-strength bolts. The compression member to be strengthened does not need to be reformed directly. The mechanical properties of a compression member strengthened by an assembled outer sleeve were studied through axial compression tests involving eight specimens. The ultimate bearing capacity of a compression member strengthened by an assembled outer sleeve increased by more than 68.6%. When the wall thickness of the assembled outer sleeve was larger and the length of the unrestrained segment for the compression member was shorter, the ultimate bearing capacity of the specimens was higher. The installation direction of the assembled outer sleeve had no noticeable effect on the mechanical properties of the specimen. Furthermore, failure modes of the compression member strengthened by the assembled outer sleeve were proposed. The failure modes included the global buckling of the specimen, local buckling of the unrestrained segment for the compression member, and the coupled buckling (including global buckling and local buckling). When the wall thickness of the assembled outer sleeve was thin, global buckling was more likely to occur. Moreover, when the unrestrained segment for the compression member was long, local buckling was more likely to occur. Compared with the unreinforced compression member, the ductility coefficient of the compression member strengthened by the assembled outer sleeve enhanced by more than 49.7%. Compression members strengthened with assembled outer sleeves have an excellent post-yield axial deformation capability.

Research on Sealing Assembly and Adjustment Method of Assembled Cabin Door of Space Station

Simulation of Assembling Cargo-Hold Spaceship Pallets

The Mechanical Behavior of the Double Piece of Tape Spring

Numerical Analysis and Improving Design of Car Door Weatherstrip Seal

Dynamics Numerical Analysis of Space Deployable Mechanism with Three-Dimensional Clearance Revolute Joint

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Deployment analysis of deployable space panel and shell structure

Macro- and Mesoscopic Design for Cabin Door Pretightened Fabric Rubber Seal Structure

Design and performance study on adaptive sealing of a dry cabin for maintenance of submarine pipeline

A Tolerance Analysis Method Based on Assembly Deformation Simulation with Stable Contact

A Framework for Rapidly Predicting the Dynamics of Flexible Solar Arrays in the China Space Station with a Verification Based on On-Orbit Measurement Data

Design of Clearance Fit Between Pico-Satellite and Its Separation Mechanism Based on Thermal-Structure Coupling

Experimental study and performance evaluation of compression members in space structures strengthened with assembled outer sleeves

Analysis and structure optimization on buckling destabilization and wrinkling of an automobile weather-strip seal in assemblage

Research on Opening and Closing Synchronization of Flexible Hatch on Space Shuttle.

Application of Digital Simulation Technology in Optimization of Assembly Process for the Core Module of Space Station

Numerical simulation of gas leakage in manned spacecraft cabin

Seal performance analysis and lifetime evaluation of capsule plugging glue

Failure process analysis of frustum windows for deep-sea manned cabin

Design of an Automatic Sealing Mechanism for Extraterrestrial Sample-Collecting Robot

Aerodynamic behavior during closing of sliding door based on fluid–solid coupled simulation