Abstract:To prevent the failure of membrane structures due to excessive loads, the tearing properties of such structures with coated fabrics were investigated in this study. First, the material properties were obtained by conducting tensile, shear, and single-edge notched tests. Thereafter, a structure tearing test was designed and conducted. Test models with different cracks exhibited similar load–displacement of actuator curves, and the critical tearing loads decreased with increasing in crack sizes. However, the decreasing trend gradually declined. Different test models exhibited similar crack expansion processes before the initiation of tearing. After tearing initiated, the crack extension speed and failure mode varied. Based on the displacement results around the crack, the influence of the crack was local before tearing initiated. However, the crack size can determine the timing and mode of the failure of membrane structures. Furthermore, by comparing the tearing test results at the structure and material levels, the crack size and critical tearing strength per unit length were verified as critical parameters for determining a relatively complete tearing mechanism. Finally, due to the differences between the structure tearing and single-edge notched tests, a stress analysis was conducted to confirm the detailed margins/limitations based on a numerical simulation. The critical tearing strength at the crack section was obtained, and the theoretical critical tearing loads were obtained based on the modified stress field model. The results related to the single-edge notched test were smaller, and can therefore provide a relatively safe estimation with respect to the membrane structure tearing test. This study was preliminary, and can serve as a basis for investigating the tearing of membrane structures.

Macro- and Mesoscopic Design for Cabin Door Pretightened Fabric Rubber Seal Structure

The Application of CAE Technique in the Design of Automotive Weatherstrip Seals

Design and Characteristics of Fabric Rubber Sealing Based on Microchannel Model

Numerical Analysis and Improving Design of Car Door Weatherstrip Seal

High-speed Abrasion Experimental Research of an Abradable Seal Rubber

Mechanical Behaviors of Non-Orthogonal Fabric Rubber Seal

Analysis and structure optimization on buckling destabilization and wrinkling of an automobile weather-strip seal in assemblage

Increment Frictional Loading Analysis for High-Lift Devices with Seals

Macroscopical contact pressure and microscopic leakage performance analysis of rubber seal considering thermal oxygen aging effect

Multilevel Micro Structures of the Clam Make the Sealing Even Tighter

Design, construction, and modeling of aircraft door sealing plate based on SMAs

Analysis of material fault of O-ring seal in aircraft cylinder

Cross Section Shape Optimization Design of Fabric Rubber Seal

Parametric Analysis of the Reciprocating Sealing Structure for Aircraft Actuator

Research on Sealing Assembly and Adjustment Method of Assembled Cabin Door of Space Station

Constitutive Behaviors and Mechanical Characterizations of Fabric Reinforced Rubber Composites

New Method for Studying the Macro-Micro Contact Properties Between Smooth Metal and Silicone Rubber

Microscopic modeling on tribological behaviors of seal composites for aiding the selection of sealing material in a wet clutch

Tearing behaviors of coated fabric membrane structures

Tangential contact modeling to seal considering elastic-plastic for lubrication transition mechanism

Design of Fabric Rubber Composite Seals with Multilevel Structure Using Machine Learning Method