Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Constitutive Behaviors and Mechanical Characterizations of Fabric Reinforced Rubber Composites

Mechanical Behaviors of Non-Orthogonal Fabric Rubber Seal

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Anisotropic Hyper-Viscoelastic Behaviors of Fabric Reinforced Rubber Composites

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Constitutive Relationship of Fabric Rubber Composites and Its Application

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Macro- and Mesoscopic Mechanical Properties of Complex Fabric Rubber Composite under Different Temperatures

An Anisotropic Hyper-Visco-pseudo-elastic Model and Explicit Stress Solutions for Fabric Reinforced Rubber Composites

A Unified Micromechanical Model for the Mechanical Properties of Two Constituent Composite Materials. Part IV: Rubber-Elastic Behavior

A Novel Method for Constitutive Characterization of the Mechanical Properties of Uncured Rubber

Experimental Investigation and Constitutive Modeling of Uncured Carbon Black Filled Rubber at Different Strain Rates

Effects of Large Deformation and Velocity Impacts on the Mechanical Behavior of Filled Rubber: Microstructure-Based Constitutive Modeling and Mechanical Testing

An experimentally validated anisotropic visco-hyperelastic constitutive model for knitted fabric-reinforced elastomer composites

Research on the Mechanical and Thermal Properties of Carbon-Fiber-Reinforced Rubber Based on a Finite Element Simulation

Constitutive modeling of stress relaxation for fabric reinforced rubber composites

Investigation on Vulcanization Degree and Residual Stress on Fabric Rubber Composites

A General Constitutive Model of Soft Elastomers

Design and Characteristics of Fabric Rubber Sealing Based on Microchannel Model

The Compression and Friction of Tubular Rubber Seal under the Curved Surface Loading

Kinetic Friction Characterizations of the Tubular Rubber Seals