Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

A Unified Micromechanical Model for the Mechanical Properties of Two Constituent Composite Materials. Part IV: Rubber-Elastic Behavior

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

A Molecular Study on the Reinforcement of Polymethylene Elastomers

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

An Anisotropic Hyper-Visco-pseudo-elastic Model and Explicit Stress Solutions for Fabric Reinforced Rubber Composites

A General Constitutive Model of Soft Elastomers

A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials

Micromechanical Modeling of Creep Behavior in Particle-Reinforced Silicone-Rubber Composites

Experiments and modeling of the coupled viscoelasticity and Mullins effect in filled rubber materials

On micromechanics approach to stiffness and strength of unidirectional composites

Constitutive Behaviors and Mechanical Characterizations of Fabric Reinforced Rubber Composites

An experimentally validated anisotropic visco-hyperelastic constitutive model for knitted fabric-reinforced elastomer composites

A modified Halpin–Tsai model for predicting the elastic modulus of composite materials

Anisotropic Hyper-Viscoelastic Behaviors of Fabric Reinforced Rubber Composites

A simplified micromechanical model for predicting effective mechanical behaviors of continuous bidirectional-fiber-reinforced composites

Effects of Large Deformation and Velocity Impacts on the Mechanical Behavior of Filled Rubber: Microstructure-Based Constitutive Modeling and Mechanical Testing

Constitutive Relationship of Fabric Rubber Composites and Its Application

Novel Model for Uniaxial Strain‐rate–dependent Stress–strain Behavior of Ethylene–propylene–diene Monomer Rubber in Compression or Tension

Molecular simulation guided constitutive modeling of filled rubber: Bridging structural parameters to constitutive equations

A simple anisotropic visco-hyperelastic constitutive model for cord-rubber composites

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites