Abstract:TiN/Ni Composites with high electrical conductivity and suitable thermal expansion coefficient have become potential materials for intermediate temperature solid oxide fuel cells interconnects (IT-SOFCs). The interconnect study is very broad in the current form, which is crucially important to increase fuel- cells power efficiency. In order to study the effect of Y2O3 addition on the oxidation resistance of TiN/Ni composites, composites with low Y2O3 content are fabricated by spark plasma sintering. The results show that by adding minor Y2O3, the average size of TiN particles increases from 1.65 μm to 2.92 μm. In addition, adding Y2O3 to the composite can reduce the mass gain (800 °C/120 h oxidation) from 4.46 mg·cm−2 to 2.97 mg·cm−2, which is a result of that Y2O3 promoted the formation of relatively dense NiO and inhibits the formation of loose rutile TiO2. Compared with TiN/Ni composites without Y2O3, the thermal expansion coefficient of Y2O3-containing composites is reduced from 12.4 × 10−6 k−1 to 11.9 × 10−6 k−1, and the diffusion depth of O is brought down from 98 μm to 63 μm. Meanwhile, composites with Y2O3 exhibits excellent electrical conductivity (1.34 × 104 S·cm−1), and high flexural strength (716 ± 14 MPa) after 800 °C/120 h oxidation. Therefore, Y2O3 can effectively change the composition and microstructure of the oxide scale and optimize the oxidation resistance of composites.

Effect of the simultaneous addition of lanthanum and nickel on the oxidation behavior and related area-specific resistance of ferritic stainless steels for solid oxide fuel cell interconnects

Effects of Mn concentration on durability of Fe-Cr ferritic steels dispersed with La 2 O 3 for solid oxide fuel cell interconnects

Evaluation of Protective La0.67Sr0.33MnO3–δ Coatings on Various Stainless Steels Used for Solid Oxide Fuel Cell Interconnects

The Effect of Metallic Co-Coating Thickness on Ferritic Stainless Steels Intended for Use as Interconnect Material in Intermediate Temperature Solid Oxide Fuel Cells

The Preparation and Properties of Ti(Nb)-Si-C Coating on the Pre-Oxidized Ferritic Stainless Steel for Solid Oxide Fuel Cell Interconnect

The effect of surface treatment on the oxidation of ferritic stainless steels used for solid oxide fuel cell interconnects

Effect of Rare Earth Y and Metal X (Co, Mn, Ni, Cu) Elements on Cr Diffusion Behavior of SOFC Metallic Interconnect

Effect of Cu on the diffusion behavior and electrical properties of Ni-Co conversion coating for metallic interconnects in solid oxide fuel cells

Oxidation and electrical behavior of Ni-Mn3O4-La2O3-coated SOFC interconnect steel

Effect of Rare Earths on Electrical Conductivity and Oxidation Resistance of Ferritic Fe-22Cr Alloys

Protective/Conductive Coatings on Ferritic Stainless Steels for Solid Oxide Fuel Cell Interconnect Applications

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects

Metallic interconnects for solid oxide fuel cell: Performance of reactive element oxide coating during long time exposure

Influence of Cr Content on the Mechanical, Oxidation, and Electrical Properties of Powder Metallurgy Ferritic Stainless Steel for Solid Oxide Fuel Cell Interconnect

Perspectives on the metallic interconnects for solid oxide fuel cells

Fe doped Ni–Co alloy by electroplating as protective coating for solid oxide fuel cell interconnect application

Possible connection between nodule development and presence of niobium and/or titanium during short time thermal oxidation of AISI 441 stainless steel in wet atmosphere

Effect of Y2O3 addition on the oxidation resistance of TiN/Ni composites applied for intermediate temperature solid oxide fuel cell interconnects

Metallic Interconnect Materials Used in Solid Oxide Fuel Cell

LaNi0.6Fe0.4O3 Cathode Contact Material:Electrical Conducting Property Manipulation and Its Effect on SOFC Electrochemical Performance

Method to Measure Area Specific Resistance and Chromium Migration Simultaneously from Solid Oxide Fuel Cell Interconnect Materials