Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

LaNi0.6Fe0.4O3 Cathode Contact Material: Electrical Conducting Property Manipulation and Its Effect on SOFC Electrochemical Performance

Electrical and Electrochemical Performances Evaluation of LaNi<sub>0.6</sub>Fe<sub>0.4</sub>O<sub>3</sub> Cathode Contact and Current Collecting Layer in SOFCs

High Performance LaCo0.6Ni0.4O3-δ Cathode Contact Material for Intermediate Temperature Solid Oxide Fuel Cells

High Performance LaCo<sub>0.6</sub>Ni<sub>0.4</sub>O<sub>3-</sub><sub>δ</sub> Cathode Contact Material for Intermediate Temperature Solid Oxide Fuel Cells

Improvement of Cell Performance and Stability by Optimizing Microstructure of Cathode Contact Materials for Planar-Type SOFC

LaCo0.6Ni0.4O3-δ as cathode contact material for intermediate temperature solid oxide fuel cells

The Investigation of In-Situ Protection Effect of LaCo0.6Ni0.4O3-δ Cathode Contact Layer on High Temperature Oxidation of Fe-16Cr Alloy As Solid Oxide Fuel Cell Interconnect

Conducting Property and Performance Evaluation of LNF As Cathode Current Contact Layer in Solid Oxide Fuel Cell

A New Candidate As the Cathode Material for Intermediate and Low Temperature Sofcs

Metal-supported Solid Oxide Fuel Cell with L a 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3-Δ Cathode

The Investigation of Ag & LaCo0.6Ni0.4O3−δ Composites As Cathode Contact Material for Intermediate Temperature Solid Oxide Fuel Cells

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Stability Study on a Novel Micro Structure Configuration of Cathode Contact Layer for Solid Oxide Fuel Cell Stack

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Preparation and electrical properties of La0.4Sr 0.6Ni0.2Fe0.8O3 using a glycine nitrate process

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Validation and Electrochemical Characterization of LSCF Cathode Deposition on Metal Supported SOFC

Enhancing ORR Catalytic Activity and Electrochemical Investigation of La1−2xBaxBixFeO3 Cathode for Low-Temperature Solid Oxide Fuel Cell

Fabrication and Study of LaNi0.6Fe0.4O3-δ and Sm0.5Sr0.5CoO3-δ Composite Cathode

Ni-doped Fe-based perovskite to obtain multifunctional and highly efficient electrocatalytic active IT-SOFC electrode

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell