Abstract:To enhance the comprehensive performance of solid oxide fuel cells (SOFCs) ferritic stainless steel (FSS) interconnectors, a novel approach involving composite electrodeposition and thermal conversion is proposed to prepare Ni-doped Co-Mn composite spinel protective coatings on FSS surfaces. The process involves the composite electrodeposition of a Ni-doped Co-Mn precursor coating, followed by thermal conversion to obtain the Co-Mn-Ni composite spinel coating. Crofer 22H was used as the substrate and orthogonal experiments were designed to investigate the influences of deposition solution pH, stirring rate, cathode current density, and the element content of Mn and Ni on the surface morphology and properties of the composite coatings, respectively. The characterization of the prepared coatings was conducted through macroscopic and microscopic morphology observations of the component surface, energy dispersive spectroscopy (EDS) analysis, and area specific resistance (ASR) testing, etc. Finally, the optimized composite electrodeposition parameters and the Mn-Ni content ratio in the solution were obtained. Experimental results indicated that the composite spinel coating prepared with the optimized process parameters exhibited excellent adhesion to the substrate, and the diffusion and migration of Cr element has been effectively inhibited. Compared with the substrate, the ASR of the coated components has also been decreased simultaneously, which provided an effective method for the surface modification of SOFC FSS interconnectors.

Effect of Cu on the diffusion behavior and electrical properties of Ni-Co conversion coating for metallic interconnects in solid oxide fuel cells

Microstructure and diffusion behavior of Co-Ni-W conversion coating for metallic interconnect of solid oxide fuel cell

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Fe doped Ni–Co alloy by electroplating as protective coating for solid oxide fuel cell interconnect application

The Preparation and Properties of Ti(Nb)-Si-C Coating on the Pre-Oxidized Ferritic Stainless Steel for Solid Oxide Fuel Cell Interconnect

High-entropy FeCoNiMnCu alloy coating on ferritic stainless steel for solid oxide fuel cell interconnects

Supersonic spray derived Cu–Co oxide coating on SUS441 to protect the metallic interconnect and to increase stability of SOFC cathode

Oxidation and electrical properties of nanostructured CeO 2 –Ni coating on solid oxide fuel cell interconnects

Ni–Co/ZrO2 Composite Coatings via Electroless Plating on Crofer 22APU for SOFC Interconnect Applications: Oxidation and Chromium Vaporization Behavior

Effect of Rare Earth Y and Metal X (Co, Mn, Ni, Cu) Elements on Cr Diffusion Behavior of SOFC Metallic Interconnect

Sputtered Fe1·5CoNi0.5 coating: An improved protective coating for SOFC interconnect applications

Oxidation and electrical behavior of Ni-Mn3O4-La2O3-coated SOFC interconnect steel

Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects

Protective coatings for Cr2O3-forming interconnects of solid oxide fuel cells

CrxN/Mn1.7Cu1.3 coating on ferritic stainless steel for solid oxide fuel cell interconnects

Metallic Co with Reactive Element Oxide Composite Coatings for Solid Oxide Fuel Cell Interconnect Applications

Efficient FeCoNi/CeO 2 coatings for solid oxide fuel cell steel interconnect applications

Fabricating a MnCo coating to improve oxidation resistance and electrical conductivity of Crofer22H alloy as SOFC interconnect

Experimental Investigation of the Initial Stage of the Oxidation Mechanism of Co Coating for Solid Oxide Fuel Cell Interconnects at 650 °C

Influences of Composite Electrodeposition Parameters on the Properties of Ni-Doped Co-Mn Composite Spinel Coatings

Effect of MnCoNiFeCu Alloy on Oxidation Behavior and Electrical Performance of AISI 441 for SOFC Interconnect Application