Abstract:Emerging macro- and flexible electronic applications such as foldable displays, artificial skins, and smart textiles grow rapidly into the market. Solution-processed thin-film transistors (TFTs) based on single-walled carbon nanotubes (SWCNTs) as the semiconductor channel can offer high performance, low cost and versatility for macro- and flexible electronics. Major challenges to the development of SWCNT-based TFTs include: (i) hysteresis in their transfer characteristics (TCs), (ii) difficulties in simultaneous achievements of high on-state current Ion and large on/off current ratio Ion/Ioff, and (iii) poor uniformity and scalability resulting from the poor solution processability. This thesis aims at developing reliable and simple process techniques for fabrication of the SWCNT-based TFTs that possess the afore-stated characteristics. It presents a systematic investigation to not only explore the fundamental device physics, but also develop novel fabrication methods for enhancement of device performance.First, issues related to the measurement of gate capacitance (Cg), the determination of current scalability, and the hysteresis in randomly networked SWCNTs are properly addressed. This leads to the establishment of a comprehensive methodology for extraction of carrier mobility (μ) for the SWCNT-based TFTs. In detail, the large hysteresis is effectively suppressed by adopting a pulsed drain current-gate voltage (Id-Vg) method in which the polarity of the gate pulse was alternating during the measurement. Different from most reported methods in the literature, Cg is accurately determined in our case by performing direct capacitance-voltage measurement on the TFTs.Second, with the employment of functional composites comprising SWCNTs embedded in a semiconducting polymer, poly-9,9 dioctyl-fluorene-cobithiophene (F8T2), as the semiconducting channel via facile solution processes under ambient conditions, the fabricated TFTs exhibit outstanding electrical performance with: (i) negligible hysteresis, (ii) high μ, (iii) high Ion and large Ion/Ioff, (iv) excellent uniformity and dimensional scalability, and (v) good stability. These highly desired performance parameters are achieved owing to an ideal composite structure with metallic SWCNTs being selectively removed and the remaining semiconducting SWCNTs being well wrapped by the polymer matrix.Finally, the developed TFTs basing on the SWCNT/F8T2 composite are used as the building block to construct some logic circuits. The resultant inverters, NANDs, and NORs are found to retain the small-hysteresis characteristics, with a cut-off frequency reaching 100 kHz. The results presented in this thesis advance the state-of-art SWCNT-based macroelectronics.

Nanospike Electrode Designs for Improved Electrical Performance in Nanoscale Organic Thin-Film Transistors

Nanospike electrodes and charge nanoribbons: A new design for nanoscale thin-film transistors

Planar Nanoscale Architecture for Organic Thin-Film Field-Effect Transistors

Charge Focusing and Enhanced Fermi-Level Modulation in Hybrid Graphene Nanospike Organic Thin-Film Transistors

Pentacene Field-Effect Transistors with Sub-10-nm Channel Lengths

Nanoscale flexible organic thin-film transistors

High-performance nano-scale InSnO transistors

A novel thin-film transistor using carbon nanotubes as both channel and electrodes

Reduced contact resistance in top-contact organic field-effect transistors by interface contact doping

Thin-Film Field-Effect Transistors Based on Composites of Semiconducting Polymer and Carbon Nanotubes

High Performance Semiconducting Enriched Carbon Nanotube Thin Film Transistors Using Metallic Carbon Nanotube Electrode

Lowering the Contact Barriers of 2D Organic F 16 CuPc Field‐Effect Transistors by Introducing Van der Waals Contacts

Semiconducting carbon nanotube network thin-film transistors with enhanced inkjet-printed source and drain contact interfaces

High‐Performance Bottom‐Contact Organic Thin‐Film Transistors with Controlled Molecule‐Crystal/Electrode Interface

Facile Inkjet-Printing Self-Aligned Electrodes for Organic Thin-Film Transistor Arrays with Small and Uniform Channel Length

Current trends in shrinking the channel length of organic transistors down to the nanoscale.

Solution-processed top-contact electrodes strategy for organic crystalline field-effect transistor arrays

Performance Enhancement Of Carbon Nanotube Thin Film Transistor By Yttrium Oxide Capping

High-performance, All-Solution-processed Organic Nanowire Transistor Arrays with Inkjet-Printing Patterned Electrodes.

High-Performance Low-Cost Organic Field-Effect Transistors With Chemically Modified Bottom Electrodes

Improving Performance of Tin-Doped-Zinc-Oxide Thin-Film Transistors by Optimizing Channel Structure