Abstract:The quality of powder feedstock for additive manufacturing (AM) metal powder bed fusion methods can significantly affect the quality of parts built from it. Particle size distribution (PSD) and shape factors influence flowability as well as the thickness and uniformity of each powder layer in the build box. For high-performance applications such as aerospace, medical, power generation and military, it becomes important to identify critical additional factors: the types, numbers and sizes of particulate contaminants that may be present in the powder. This is true for virgin, used and blended powders. Contaminants may be introduced during powder manufacture (e.g., ceramic insulation fragments from gas atomization equipment), handling (building insulation, talc) or possibly during the build process itself. Contaminants contained within a batch of powder can be physically built into an additive part when they are incorporated into the melt pool, and they can remain as discrete particulates or non-fused interfaces that act as stress concentrators. Their presence may decrease fatigue life by increasing the likelihood of fatigue crack initiation. This article describes three methods to rapidly and quantifiably characterize powder feedstock. (1) Computer-controlled scanning electron microscopy (CCSEM) provides quantitative size and shape parameters, as well as fine surface details from individual images on a particle-by-particle basis in large populations of powder. (2) Energy-dispersive spectroscopy (EDS) can be included, providing insights into variations within a batch of powder, as well as contaminant compositions. (3) For critical applications, the heavy liquid separation (HLS) method physically extracts low-density contaminants from a sample of powder metal down to part-per-billion detection limits to allow direct examination of contaminants and enhance identification and prevention of their sources. Altogether, these methods permit direct comparisons among powder metal samples. Better quantification of powder characteristics aids determination of suitability for end uses.

Assessment of trapped powder removal and inspection strategies for powder bed fusion techniques

A technical review of the challenges of powder recycling in the laser powder bed fusion additive manufacturing process

In-situ Areal Inspection of Powder Bed for Electron Beam Fusion System Based on Fringe Projection Profilometry

A Surface Quality Optimization Strategy Based on a Dedicated Melt-Pool Control Via the Dashed-Scan Contouring Technique in Electron Beam Powder Bed Fusion

Additive Manufacturing: Assessing Metal Powder Quality Through Characterizing Feedstock and Contaminants

In-Situ Characterization of Pore Formation Dynamics in Pulsed Wave Laser Powder Bed Fusion

Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes

Laser Powder Bed Fusion: A Review on the Design Constraints

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Investigation of Laser-Powder Interaction in Laser Powder Bed Fusion Process in Additive Manufacturing

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

Revealing transient powder-gas interaction in laser powder bed fusion process through multi-physics modeling and high-speed synchrotron x-ray imaging

Defects and anomalies in powder bed fusion metal additive manufacturing

Pore Formation Driven by Particle Impact in Laser Powder-Blown Directed Energy Deposition.

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

Laser Powder Bed Fusion of Powder Material: A Review

Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

Transient Dynamics of Powder Spattering in Laser Powder Bed Fusion Additive Manufacturing Process Revealed by In-Situ High-Speed High-Energy X-Ray Imaging

Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter and denudation zones

Mitigation of lack of fusion defects in powder bed fusion additive manufacturing