Abstract:The quality of powder feedstock for additive manufacturing (AM) metal powder bed fusion methods can significantly affect the quality of parts built from it. Particle size distribution (PSD) and shape factors influence flowability as well as the thickness and uniformity of each powder layer in the build box. For high-performance applications such as aerospace, medical, power generation and military, it becomes important to identify critical additional factors: the types, numbers and sizes of particulate contaminants that may be present in the powder. This is true for virgin, used and blended powders. Contaminants may be introduced during powder manufacture (e.g., ceramic insulation fragments from gas atomization equipment), handling (building insulation, talc) or possibly during the build process itself. Contaminants contained within a batch of powder can be physically built into an additive part when they are incorporated into the melt pool, and they can remain as discrete particulates or non-fused interfaces that act as stress concentrators. Their presence may decrease fatigue life by increasing the likelihood of fatigue crack initiation. This article describes three methods to rapidly and quantifiably characterize powder feedstock. (1) Computer-controlled scanning electron microscopy (CCSEM) provides quantitative size and shape parameters, as well as fine surface details from individual images on a particle-by-particle basis in large populations of powder. (2) Energy-dispersive spectroscopy (EDS) can be included, providing insights into variations within a batch of powder, as well as contaminant compositions. (3) For critical applications, the heavy liquid separation (HLS) method physically extracts low-density contaminants from a sample of powder metal down to part-per-billion detection limits to allow direct examination of contaminants and enhance identification and prevention of their sources. Altogether, these methods permit direct comparisons among powder metal samples. Better quantification of powder characteristics aids determination of suitability for end uses.

Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes

Factors affecting particle characterization of powders used in additive manufacturing

Additive Manufacturing: Assessing Metal Powder Quality Through Characterizing Feedstock and Contaminants

Influence of powder characteristics on properties of parts manufactured by metal additive manufacturing

Effect of Powder Variability on Laser Powder Bed Fusion Processing and Properties of 316L

Numerical simulation of the flow behavior and powder spreading mechanism in powder bed-based additive manufacturing

Influences of powder morphology and spreading parameters on the powder bed topography uniformity in powder bed fusion metal additive manufacturing

Experimental approach for development of a powder spreading metric in additive manufacturing

Assessment of trapped powder removal and inspection strategies for powder bed fusion techniques

A review on powder bed fusion technology of metal additive manufacturing

Revealing Particle-Scale Powder Spreading Dynamics in Powder-Bed-based Additive Manufacturing Process by High-Speed X-Ray Imaging

An overview of powder granulometry on feedstock and part performance in the selective laser melting process

In Situ Characterization of Laser Powder Bed Fusion Using High-Speed Synchrotron X-ray Imaging Technique

Multiphysics modelling of powder bed fusion for polymers

The influence of material properties and process parameters on the spreading process in additive manufacturing

Assessing powder processability and melting behavior in powder-bed fusion additive manufacturing

Study on powder particle behavior in powder spreading with discrete element method and its critical implications for binder jetting additive manufacturing processes

Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends

Effect of Scan Pattern on the Microstructure and Mechanical Properties of Powder Bed Fusion Additive Manufactured 17-4 Stainless Steel

Surface analysis in additive manufacturing: A systematic literature review regarding powder bed fusion processes

Transient Dynamics of Powder Spattering in Laser Powder Bed Fusion Additive Manufacturing Process Revealed by In-Situ High-Speed High-Energy X-Ray Imaging