Abstract:The quality of powder feedstock for additive manufacturing (AM) metal powder bed fusion methods can significantly affect the quality of parts built from it. Particle size distribution (PSD) and shape factors influence flowability as well as the thickness and uniformity of each powder layer in the build box. For high-performance applications such as aerospace, medical, power generation and military, it becomes important to identify critical additional factors: the types, numbers and sizes of particulate contaminants that may be present in the powder. This is true for virgin, used and blended powders. Contaminants may be introduced during powder manufacture (e.g., ceramic insulation fragments from gas atomization equipment), handling (building insulation, talc) or possibly during the build process itself. Contaminants contained within a batch of powder can be physically built into an additive part when they are incorporated into the melt pool, and they can remain as discrete particulates or non-fused interfaces that act as stress concentrators. Their presence may decrease fatigue life by increasing the likelihood of fatigue crack initiation. This article describes three methods to rapidly and quantifiably characterize powder feedstock. (1) Computer-controlled scanning electron microscopy (CCSEM) provides quantitative size and shape parameters, as well as fine surface details from individual images on a particle-by-particle basis in large populations of powder. (2) Energy-dispersive spectroscopy (EDS) can be included, providing insights into variations within a batch of powder, as well as contaminant compositions. (3) For critical applications, the heavy liquid separation (HLS) method physically extracts low-density contaminants from a sample of powder metal down to part-per-billion detection limits to allow direct examination of contaminants and enhance identification and prevention of their sources. Altogether, these methods permit direct comparisons among powder metal samples. Better quantification of powder characteristics aids determination of suitability for end uses.

Assessing powder processability and melting behavior in powder-bed fusion additive manufacturing

Non-Equilibrium Solidification Behavior With Solute Trapping Associated With Powder Characteristics During Electron Beam Additive Manufacturing

Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing

In-situ observation of powder spreading in powder bed fusion metal additive manufacturing process using particle image velocimetry

Influence of the particle size distribution of monomodal 316L powder on its flowability and processability in powder bed fusion

Numerical simulation of the flow behavior and powder spreading mechanism in powder bed-based additive manufacturing

Effect of powder morphology on flowability and spreading behavior in powder bed fusion additive manufacturing process: a particle-scale modeling study

Quantitative Characterization of Metal Powder Morphology, Size Distribution, and Flowability for Additive Manufacturing

Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes

Predicting and correlating melt pool characteristics with processing parameters in IN625 powder bed fusion additive manufacturing

Effect of Powder Variability on Laser Powder Bed Fusion Processing and Properties of 316L

Multiscale heat transfer affected by powder characteristics during electron beam powder-bed fusion

In-situ Characterization and Quantification of Melt Pool Variation under Constant Input Energy Density in Laser Powder Bed Fusion Additive Manufacturing Process

Factors affecting particle characterization of powders used in additive manufacturing

Thermal properties of powder beds in energy absorption and heat transfer during additive manufacturing with electron beam

Significance of powder feedstock characteristics in defect suppression of additively manufactured Inconel 718

Investigation of an Increased Particle Size Distribution of Ti-6Al-4V Powders Used for Laser-Based Powder Bed Fusion of Metals

Experimental approach for development of a powder spreading metric in additive manufacturing

An investigation into the effect of CoCrMo powder characteristics on the powder bed density in laser-based powder bed fusion units

Raking process for Powder Bed Fusion of Ti-6Al-4V alloy Powder Analyzed by Discrete Element Method

Additive Manufacturing: Assessing Metal Powder Quality Through Characterizing Feedstock and Contaminants