Abstract:Material extrusion additive manufacturing of metals has found widespread application and is typically thought of as a facile technique to create metal components. This can be undertaken without the need for energy sources typically used in direct energy deposition and powder bed fusion processes. Despite recent advances in achieving net shape and improvements to material/component integrity, these processes are characterized by performance limiting defects which often emerge as a result of deposition strategy and are retained post sintering. Although the debinding and sintering steps have been investigated for metal injection molding technology, quantitative studies of defect evolution are lacking. This work proposes an approach to study the pore evolution behavior from deposition to sintering through X-ray Computed Tomography (XCT) image processing. Quantitative results of pore shrinking, partial and full closure through backtracking of individual pores from the sintered to the green state are presented. It is shown that where pores are larger than 4 × 10 -6 mm 3 , equals to the D 90 of the feedstock metal particles, these cannot be fully closed upon sintering and will survive to limit the performance of the final part. The average pore shrinkage is by a factor of 5.6 and partial closure happens in pores with minimum Feret diameter of 33 μm, equals to 160% of the D 90 powder particle, or less. The utilization of overfill as a proposed technique in the literature for the elimination of macro pores is investigated, yielding disparate and unsatisfactory results. This discrepancy can be attributed to the insufficient formation of micro-channels within the pore structure during the deposition process of the aqueous feedstock, leading to regions of weak grain bonding. To evaluate the contribution of these to undermining material integrity, tensile tests of linear and circular deposition strategies are undertaken. Experiments show that track interface length plays a major role in determining elongation to failure and tensile strength. It is concluded that the limitation to the mechanical properties of metal paste extrusion components originates from the emergence of defects and their characteristics after the completion of the processing, as opposed to being influenced by the metallurgy prior or post sintering.

Defects and anomalies in powder bed fusion metal additive manufacturing

Defect and Distortion in Powder Bed Fusion of Metal Additive Manufacturing Parts

Defects in Metal Additive Manufacturing: Formation, Process Parameters, Postprocessing, Challenges, Economic Aspects, and Future Research Directions

Defects in Metal Additive Manufacturing Processes

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

Mitigation of lack of fusion defects in powder bed fusion additive manufacturing

Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review

Analytical Probabilistic Modeling of Additive Manufacturing-Induced Process Defects and Experimental Validation

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

A Review and a Statistical Analysis of Porosity in Metals Additively Manufactured by Laser Powder Bed Fusion

The interplay of local chemistry and plasticity in controlling microstructure formation during laser powder bed fusion of metals

Defect inspection technologies for additive manufacturing

Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-Based Additive Manufacturing

Defect Evolution and Mitigation in Metal Extrusion Additive Manufacturing: from Deposition to Sintering

A review of computational modeling in powder-based additive manufacturing for metallic part qualification

A review on powder bed fusion technology of metal additive manufacturing

Defect and satellite characteristics of additive manufacturing metal powders

Alloy Design for Laser Powder Bed Fusion Additive Manufacturing:A Critical Review

Fundamental Mechanics Problems in Metal Additive Manufacturing: A State-of-art Review

Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing