Abstract:The low quality of up-facing inclined surfaces, combined with a lack of in-situ treatments, is a crucial challenge in Laser Powder Bed Fusion of metals. A recently proposed strategy, so-called Incremental Dual Laser Powder Bed Fusion (IDLPBF), aims to enhance the quality of up-facing inclined surfaces of metal parts directly during building. This is achieved through automatically alternating between laser remelting and building in height steps of 1.5 mm. Laser remelting involves selectively removing powder that is covering the inclined surface through nanosecond pulsed laser-induced shock waves and subsequently remelting the uncovered surface using a continuous wave laser. Treated surfaces are hence composed of laser remolten zones separated by elevated ridges in the overlap region, referred to as stitching zones. These stitching zones can compromise the geometrical accuracy and, consequently, pose a serious risk to fatigue performance. This work focuses on the enhancement of stitching zones and resulting quality of inclined surfaces through IDLPBF of a novel tool steel (M789). The paper covers the effect of various scan strategies for laser remelting on the stitching zone size. By optimizing the orientation of consecutive remelting passes and the position of the remelting fields, the stitching zone width could be reduced from 830 μm to 70 μm. Moreover, the optimized IDLPBF process was successfully applied to a large range of surface inclinations with respect to the horizontal build plate (5°-60°). For the first time, a significant quality improvement for 60° inclined surfaces was achieved, reducing the stress concentration factor by 35 %. The significantly reduced maximum stress concentrations were largely observed at stitching zones, in contrast to multiple high stress concentration sites randomly scattered across as-built surfaces. As a proof of concept, 60 mm high demonstrator parts including typically inaccessible surfaces located in the shadow zone were fully automated manufactured by IDLPBF.

A Surface Quality Optimization Strategy Based on a Dedicated Melt-Pool Control Via the Dashed-Scan Contouring Technique in Electron Beam Powder Bed Fusion

An Optimized Scanning Strategy to Mitigate Excessive Heat-Accumulation Caused by Short Scanning-Lines in Laser Powder Bed Fusion Process

Multiple interaction electron beam powder bed fusion for controlling melt pool dynamics and improving surface quality

Particle-scale computational fluid dynamics study on surface morphology of GH4169 superalloy during multi-laser powder bed fusion with low energy density

Multi-physics Modeling of Side Roughness Generation Mechanisms in Powder Bed Fusion

Novel strategy for automated quality enhancement of up-facing inclined surfaces by incremental dual laser powder bed fusion

In-situ Areal Inspection of Powder Bed for Electron Beam Fusion System Based on Fringe Projection Profilometry

Improvement of wetting and necking of nickel-based superalloys fabricated by sequential dual-laser powder bed fusion via particle-scale computational fluid dynamics

Assessment of trapped powder removal and inspection strategies for powder bed fusion techniques

Characterisation Methods for Powder Bed Fusion Processed Surface Topography

A systematic approach to optimize parameters in manufacturing complex lattice structures of NiTi using electron beam PBF process

Optimisation of the laser polishing for laser-powder bed fusion and electron beam-powder bed fusion Ti6Al4V surfaces

Improving component dimensional accuracy in electron beam powder bed fusion by addressing nonlinear deformations with 3D compensation strategies

A66Pathways to exploit the multi-spot scanning strategy in electron beam additive manufacturing for control of microstructure and defect density

Investigation on surface integrity of electron beam melted Ti-6Al-4 V by precision grinding and electropolishing

Layer-wise Surface Quality Improvement in Laser Powder Bed Fusion Through Surface Anomaly Detection and Control

Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

Influence of Pre- and Post-Contouring Strategies to Downskin Sloped Surfaces in Laser Powder-Bed Fusion (L-PBF) Additive Manufacturing

Improving Surface Electrochemical Polishing Quality of Additive Manufactured AlSi10Mg by Reconstituting the Si Phase

Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing