Abstract:Electrochemical devices such as batteries, fuel cells, and capacitors employing a carbon nanotube (CNT) electrode can be improved by lowering the contact resistance between CNTs and metallic contacts. The current work investigates two simultaneous strategies to enhance the contact by using chemical doping of CNTs with potassium tetrabromoaurate (KAuBr 4 ) and ultrasonic welding to a metal foil. The specific contact resistivity was measured using the transfer length method (TLM) to evaluate CNT laser cut test structures having ultrasonically welded Cu contacts with and without KAuBr 4 doping. Purified CNT-Cu samples had a specific contact resistivity of 5.4 mΩ∙cm 2 , whereas the KAuBr 4 doped CNT-Cu samples were 2.2 mΩ∙cm 2 . Confirmation of selective doping to the weld region was made using measured differences in the emissivity of purified and KAuBr 4 CNTs, which were 0.84 and 0.56, respectively. The lower contact resistance from KAuBr 4 doped CNT-Cu ultrasonic welds also reduced the extent of Joule heating beyond the contact region when applying increasing current to failure in a 2-terminal test structure. The benefit of selectively doped CNT-Cu welds was demonstrated across rectangular ribbon and electrode form factors up to an area of 6 cm x 8 cm (typical of electrochemical pouch-cell current collectors). Each form factor showed a 1.5x reduction in peak temperature when selective doping of the CNTs was performed prior to ultrasonic welding of the Cu contact. Thus, the combination of selective doping and ultrasonic welding demonstrates a viable method to fabricate low electrical resistance contacts between CNT electrodes and metallic contacts for electrochemical devices.

Contact resistance reduction of carbon nanotube via through O2 plasma post-synthesis treatment

Ultraviolet/ozone and oxygen plasma treatments for improving the contact of carbon nanotube thin film transistors

Controllable Etching-Induced Contact Enhancement for High-Performance Carbon Nanotube Thin-Film Transistors

Establishing Ohmic Contact of a Radial Compressed CNT Bundle with High Work Function Metal

Selective Chemical Doping of Carbon Nanotube Conductors to Reduce Contact Resistance with Copper in Ultrasonic Welds

Contact Resistance Reduction on Layered Mos2 by Ar Plasma Pre-Treatment

The Optimization of Contact Interface Between Metal/mos2 FETs by Oxygen Plasma Treatment

Ar, O2, CHF3, and SF6 plasma treatments of screen-printed carbon nanotube films for electrode applications

Low-Resistance Carbon Nanotube Contact Plug to Silicon

Contact Resistance Effects in Carbon Nanotube Thin Film Transistors

Annealing Nano-to-micro Contacts for Improved Contact Resistance

Contact Engineering and Channel Doping for Robust Carbon Nanotube NFETs

Characterization of the Resistance and Force of a Carbon Nanotube/Metal Side Contact by Nanomanipulation

Conductive contact area estimation for carbon nanotube via interconnects using secondary-electron imaging

Improving Field Emission Properties of Carbon Nanotubes Film by High-Temperature Sintering and Plasma Bombarding

Effects of Oxygen on Growth of Carbon Nanotubes Prospered by PECVD

Measuring the electrical resistivity and contact resistance of vertical carbon nanotube bundles for application as interconnects

Electrophoretic Deposition of Multi‐Walled Carbon Nanotubes: The Key Role of Plasma Functionalization and Polymerization

Plasma etching carbon nanotube arrays and the field emission properties

The Role of Oxygen at the Interface between Titanium and Carbon Nanotubes

Study on the pretreatment of poly(ether ether ketone)/multiwalled carbon nanotubes composites through environmentally friendly chemical etching and electrical properties of the chemically metallized composites