Abstract:The elastoplastic mechanical behaviour of an epoxy-impregnated REBCO pancake winding under cryogenics and high magnetic field is investigated in the frame of finite element (FE) modelling. A two-dimensional axisymmetric electromagnetic-thermal-structure multi-physics multi-layer FE model with main layers of the coated conductor and insulation materials is developed. The radial stress and hoop stress on each constituent layer induced by thermal mismatch stress during cooling are investigated. The mechanical behaviour of each constituent material is also analysed by considering the thermal mismatch stress and electromagnetic force under 20 T background field. The results show that discrete stresses appear in all the constituent materials indicating that the multi-layer winding model containing the main constituent materials is necessary for the accurate stress analysis in an epoxy-impregnated REBCO winding. The stress of each constituent material induced by thermal mismatch during cooling process are too high to be ignored in the subsequent electromagnetic structure analysis. The mechanical-magnetic coupling analyses show that the stresses of all the constituent materials increase with the transport current. The plastic failure mainly induced by hoop stress successively occurs on copper stabilizer and Hastelloy substrate of the innermost turn, and the plastic region propagates from the inner turns to the outer turns with the increase of transport current. The failure of the superconducting layer occurs before the yield in Hastelloy due to the direct action of Lorentz force on the superconducting layers. The transverse tensile stress increases with the increasing transport current, indicating that the risk of transverse delamination failure increases with the increase of transport current. The mechanical failure modes including delamination within the conductor, plastic deformation in substrate and crack in superconducting layer should be seriously considered.

Effects of Wax Impregnation on Contact Resistivity Between REBCO Tapes

Effect of the Cu Stabilisation Layer on the Turn-to-turn Contact Resistance of a Non-Insulated REBCO Winding

The Possible Control Method of Turn-to-Turn Contact Resistivity of REBCO Coil by Surface Coating

Contact resistivity due to oxide layers between two REBCO tapes

Database of the effect of stabilizer on the resistivity and thermal conductivity of 20 different commercial REBCO tapes

The Study of Epoxy-Impregnated REBCO Coils

Investigation of a Repeatable and Widely Applicable Method to Reduce the Turn-to-turn Contact Resistivity of REBCO Tapes

Experimental study to investigate magnetic field and winding force-dependent contact resistance of NI REBCO coil

Sudden Discharging and Overcurrent Simulations of REBCO Coils Coated With Conductive Epoxy Resin

Turn-to-Turn Contact Resistance Measurement of NI REBCO Double Pancake Coils

Electrical Contact Resistance in REBCO Stacks and Cables With Modified Surfaces

Delamination Avoidance in Epoxy Wet-Wound REBCO Coils by Release Agent Coating

Exploration of Correlation Between the Material Characteristics of the Copper Layer on the Electrical and Thermal Properties of REBCO Tape and Coil

Residual resistance ratio of Cu stabilizer in commercial REBCO tapes

In Situ Detection of Delamination and Critical Current Degradation Caused by the Thermal Stress in Epoxy Impregnated REBa2Cu3O7−δ Coils

Bending-Peeling Method to Research the Effect of Lateral Stress on Superconductivity of REBCO Tape at Liquid-Nitrogen Temperature

Synergic realization of electrical insulation and mechanical strength in liquid nitrogen for high-temperature superconducting tapes with ultra-thin acrylic resin coating

Critical Current Degradation Behaviour of Various REBCO Tapes under Uniaxial Strain

Characteristic resistance change of no-insulation REBCO pancake coils by deformation

The Research on No-Insulation ReBCO Racetrack Coil

Electromagnetic-thermal-structure multi-layer nonlinear elastoplastic modelling study on epoxy-impregnated REBCO pancake coils in high-field magnets