Abstract:In order to improve the image quality of the aerial optoelectronic sensor over a wide range of temperature changes, high thermal adaptability of the primary mirror as the critical components is considered. Integrated optomechanical analysis and optimization for mounting primary mirrors are carried out. The mirror surface shape error caused by uniform temperature decrease was treated as the objective function, and the fundamental frequency of the mirror assembly and the surface shape error caused by gravity parallel or vertical to the optical axis are taken as the constraints. A detailed size optimization is conducted to optimize its dimension parameters. Sensitivities of the optical system performance with respect to the size parameters are further evaluated. The configuration of the primary mirror and the flexure are obtained. The simulated optimization results show that the size parameters differently affect the optical performance and which factors are the key. The mirror surface shape error under 30 °C uniform temperature decrease effectively decreased from 26.5 nm to 11.6 nm, despite the weight of the primary mirror assembly increases by 0.3 kg. Compared to the initial design, the value of the system’s modulation transfer function (0° field angle) is improved from 0.15 to 0.21. Namely, the optical performance of the camera under thermal load has been enhanced and thermal adaptability of the primary mirror has been obviously reinforced after optimization. Based on the optimized results, a prototype of the primary mirror assembly is manufactured and assembled. A ground thermal test was conducted to verify difference in imaging quality at room and low temperature, respectively. The image quality of the camera meets the requirements of the index despite degrading.

Cooling air flow field in the primary mirror temperature control system of a solar telescope

Thermal control of primary mirror of Space Solar Telescope

Optimization of Thermal Control Design for Aerial Reflective Opto-Mechanical Structure

Engineering Design of an Active–Passive Combined Thermal Control Technology for an Aerial Optoelectronic Platform

Design and Optimization for Mounting Primary Mirror with Reduced Sensitivity to Temperature Change in an Aerial Optoelectronic Sensor

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

Thermal analysis of a reflection mirror by fluid and solid heat transfer method

Thermal Analysis of Large Telescope Structure

Temperature homogenization control of parabolic trough solar collector field based on hydraulic calculation and extended Kalman filter

Ground-Layer Adaptive Optics for the 2.5m Wide-field and High-resolution Solar Telescope

Thermal optimization of a high heat load liquid-metal-bath cooled mirror at the Hefei Advanced Light Facility

Thermal and fluid dynamic analysis of a flat manifold microchannel heat sink in parabolic trough solar collector with optical errors

A Multiple-Field Finite Element Method Analysis of Observation Window for Cryogenic Wind Tunnel

Optimization and performance evaluation of a high-temperature solar receiver for concentrated solar power applications

Hybrid Ball-Hinged Secondary Mirror Assembly for High-Precision Surface Shape Maintenance.

A thermo-optical test device utilizing the 100-m x-ray test facility

Research on accurate non-contact temperature measurement method for telescope mirror

Quantitative Evaluation on Thermal Seeing Induced 2m Ring Solar Telescope.

Adaptive thermal refocusing system for a high-resolution space camera

Thermal-fluid-mechanical analysis of tubular solar receiver panels using supercritical CO2 as heat transfer fluid under non-uniform solar flux distribution

Preliminary study on temperature pattern in China solar greenhouse using computational fluid dynamics