Abstract:In order to improve the image quality of the aerial optoelectronic sensor over a wide range of temperature changes, high thermal adaptability of the primary mirror as the critical components is considered. Integrated optomechanical analysis and optimization for mounting primary mirrors are carried out. The mirror surface shape error caused by uniform temperature decrease was treated as the objective function, and the fundamental frequency of the mirror assembly and the surface shape error caused by gravity parallel or vertical to the optical axis are taken as the constraints. A detailed size optimization is conducted to optimize its dimension parameters. Sensitivities of the optical system performance with respect to the size parameters are further evaluated. The configuration of the primary mirror and the flexure are obtained. The simulated optimization results show that the size parameters differently affect the optical performance and which factors are the key. The mirror surface shape error under 30 °C uniform temperature decrease effectively decreased from 26.5 nm to 11.6 nm, despite the weight of the primary mirror assembly increases by 0.3 kg. Compared to the initial design, the value of the system’s modulation transfer function (0° field angle) is improved from 0.15 to 0.21. Namely, the optical performance of the camera under thermal load has been enhanced and thermal adaptability of the primary mirror has been obviously reinforced after optimization. Based on the optimized results, a prototype of the primary mirror assembly is manufactured and assembled. A ground thermal test was conducted to verify difference in imaging quality at room and low temperature, respectively. The image quality of the camera meets the requirements of the index despite degrading.

Engineering Design of an Active–Passive Combined Thermal Control Technology for an Aerial Optoelectronic Platform

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Optimization of Thermal Control Design for Aerial Reflective Opto-Mechanical Structure

Influence of temperature on infrared optical system and athermal design

Thermal design and analysis for the high resolution visible light aeronautic camera

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

Design of A Panoramic Long-Wave Infrared Athermal System

Thermal Analysis and Design of the Aerial Camera’s Primary Optical System Components

Design and Optimization for Mounting Primary Mirror with Reduced Sensitivity to Temperature Change in an Aerial Optoelectronic Sensor

Research on Active Heat Dissipation Experimental System for Focal Plate

Passive Athermalisation in Infrared Optical Systems

Thermal control design and analysis of a zoom TV optical mechanical system

Thermal integration analysis of optical machines for space-based laser communications

A Catadioptric Infrared Dual Band Optically Passive Athermal Optical System

Thermal control of primary mirror of Space Solar Telescope

Optimization method of the thermal control index of space remote sensors based on force-thermal coupling algorithm

Design and thermal characteristic test of a temperature control system for spacecraft precision instrument

Method and Verification of Liquid Cooling Heat Dissipation Based on Internal Heat Source of Airborne Long-Focus Aerial Camera

The Opto-Mechanical–Thermal Coupling Analysis and Verification of an All-Aluminum Freeform Imaging Telescope

Lumped Parameter Thermal Network Modeling and Thermal Optimization Design of an Aerial Camera

Quasi-All-Passive Thermal Control System Design and On-Orbit Validation of Luojia 1-01 Satellite