Abstract:In order to improve the image quality of the aerial optoelectronic sensor over a wide range of temperature changes, high thermal adaptability of the primary mirror as the critical components is considered. Integrated optomechanical analysis and optimization for mounting primary mirrors are carried out. The mirror surface shape error caused by uniform temperature decrease was treated as the objective function, and the fundamental frequency of the mirror assembly and the surface shape error caused by gravity parallel or vertical to the optical axis are taken as the constraints. A detailed size optimization is conducted to optimize its dimension parameters. Sensitivities of the optical system performance with respect to the size parameters are further evaluated. The configuration of the primary mirror and the flexure are obtained. The simulated optimization results show that the size parameters differently affect the optical performance and which factors are the key. The mirror surface shape error under 30 °C uniform temperature decrease effectively decreased from 26.5 nm to 11.6 nm, despite the weight of the primary mirror assembly increases by 0.3 kg. Compared to the initial design, the value of the system’s modulation transfer function (0° field angle) is improved from 0.15 to 0.21. Namely, the optical performance of the camera under thermal load has been enhanced and thermal adaptability of the primary mirror has been obviously reinforced after optimization. Based on the optimized results, a prototype of the primary mirror assembly is manufactured and assembled. A ground thermal test was conducted to verify difference in imaging quality at room and low temperature, respectively. The image quality of the camera meets the requirements of the index despite degrading.

Adaptive thermal refocusing system for a high-resolution space camera

Influence of temperature on infrared optical system and athermal design

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

Design of a focusing system for micro-nano satellite remote sensing camera based on thermal control technology

Design of detection optical system with large relative aperture

Design of A Panoramic Long-Wave Infrared Athermal System

On-orbit thermal deformation prediction for a high-resolution satellite camera

Application of Athermalisation in Optical Systems

Passive Athermalisation in Infrared Optical Systems

Temperature-Robust Learned Image Recovery for Shallow-Designed Imaging Systems

Optimization method of the thermal control index of space remote sensors based on force-thermal coupling algorithm

Thermal design and analysis for the high resolution visible light aeronautic camera

Optimization Thermal Design Method for Space Cameras Based on Thermo-Optical Analysis and Taguchi Method

Athermalization design of 8-12μm infrared hybrid refractive/reflective/diffractive lenses for tank scan

Aberration Athermal Design for Infrared Search and Trace Optical System

Research on Active Heat Dissipation Experimental System for Focal Plate

Rigid-flexible connection of TMA space camera and satellite platform

Optical Design of the Space Observation Camera with Long Focal Length and Wide Field of View

On-Orbit Self-Focusing Using Conjugated Optical Fiber Waveguides for Space Optical Cameras

Thermal Stability Design of Asymmetric Support Structure for an Off-Axis Space Camera

Design and Optimization for Mounting Primary Mirror with Reduced Sensitivity to Temperature Change in an Aerial Optoelectronic Sensor