Abstract:Solar power tower (SPT) is regarded as the most promising technology for applications in concentrating solar power. However, a significant decrease in the solar-thermal conversion efficiency of the tower receiver in the SPT system occurs at high operating temperatures due to the massive radiation heat loss caused. In this work, a detailed heat transfer model of the tower receiver was established, and the negative thermal-flux phenomenon was discovered in the tower receiver based on the verified simulation results. In this context, a novel improvement strategy for regional solar absorbing coating on the tower receiver was proposed to enhance the thermal performance of the tower receiver in the next-generation SPT system. Two kinds of novel tower receivers by changing conventional solar absorbing coating into the silver-based coating (novel receiver I) and black chrome-based coating (novel receiver II) at negative thermal-flux regions were proposed, investigated, and compared with the prototype tower receiver without changes. The overall thermal performance of three kinds of tower receivers was numerically analyzed under different solar irradiances, solar hours throughout the day, and seasons. The results demonstrated that both the novel tower receivers achieved breakthrough enhancements on the thermal performance compared with the prototype receiver, showing great potential for practical application. The negative thermal-flux regions accounted for almost a quarter of the entire receiver surface. The annual average radiation heat losses from negative thermal-flux regions in the novel receivers I and II were effectively reduced by 93.00 and 53.14%. Accordingly, the annual average heat gains and receiver efficiencies were significantly enhanced by 6.54 and 6.03%, respectively.

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

Experimental and Simulation Study of Mn–Fe Particles in a Controllable-Flow Particle Solar Receiver for High-Temperature Thermochemical Energy Storage

Optical and Thermal Performance of a Novel Solar Particle Receiver

Negative Thermal-Flux Phenomenon and Regional Solar Absorbing Coating Improvement Strategy for the Next-Generation Solar Power Tower

A Sliding-Bed Particle Solar Receiver with Controlling Particle Flow Velocity for High-Temperature Thermal Power Generation

A Review of Radiative Heat Transfer in Fixed-Bed Particle Solar Receivers

Modeling and dynamic simulation of receiver in a solar tower power station

A new methodology of thermal performance improvement and numerical analysis of free-falling particle receiver

The performance evaluation of the free-falling particle solar receiver with a novel zigzag mass-flow controlled particle release pattern

Simulation and Experimental Study on a Spiral Solid Particle Solar Receiver

Design Evaluation of a Next-Generation High-Temperature Particle Receiver for Concentrating Solar Thermal Applications

Concentrated Solar Power Tower Systems Coupled Locally with Spectrally Selective Coatings for Enhancement of Solar-Thermal Conversion and Economic Performance

Coupled optical and thermal simulation of the thermal performance of a 50 MWe external cylindrical solar receiver

Optimization and performance evaluation of a high-temperature solar receiver for concentrated solar power applications

A theoretical heat transfer analysis of different indirectly-irradiated receiver designs for high-temperature concentrating solar power applications

Optimization of solar receivers for high-temperature solar conversion processes: Direct vs. Indirect illumination designs

An Optimized Model and Test of the China'S First High Temperature Parabolic Trough Solar Receiver

A Novel Impeded Flow Particle Receiver for Better Stability and Controllability

Thermal performance analysis of a novel Conical-Cylindrical-Conical cavity receiver for a Scheffler concentrated solar system

Optical and Thermal Performance of a High-Temperature Spiral Solar Particle Receiver

On-sun testing of a 1 MWth quartz tube bundle solid particle solar receiver