Abstract:<p>The thermal performance of a quartz tube solid particle solar receiver (SPSR) with the gravity driven packed particles moving down in a semi-annular particle flow channel has been experimentally and numerically investigated, and the particle flow channel in the quartz tube was shaped by a ceramic fiber insert. The SPSR was heated by a solar simulator with 7 Xenon lamps at 130A electric current which generated a mean irradiant flux of 276 kW/m<sup>2</sup> on the 0.26 m irradiated length, grey ceramsite sand with the solar weighted absorptivity of 72.34% was used in the study. The experimental results with a 6 mm particle layer thickness indicated the particle temperature increase of 164 K and the thermal efficiency of 50.25%. A thinner particle layer thickness was shown to improve the thermal performance of the SPSR as verified both in the experiments and simulations. Although the particle temperature increase in a single pass was not high enough in the experiments, compared with other types of SPSR, this design obtained an advantageous particle temperature increase in per unit irradiation length. Moreover, the particle temperature increase in a single pass can be promoted by a longer irradiated length, and therefore the requirement for continuous recirculation of the solid particles will be decreased which can greatly reduce the required parasitic power. Besides, according to the numerical model, the thermal efficiency can be further improved by various means such as improving the solar weighted absorptivity of the solid particles, reducing the particle layer thickness, increasing particle mass flow rate and so on. A sensitive analysis illustrated that the mean particle diameter had the minimal impact on the thermal performance among the various influencing factors, but a value of greater than 700 μm was recommended based on the simulation results.</p>

Optical and Thermal Performance of a Novel Solar Particle Receiver

Experimental and Simulation Study of Mn–Fe Particles in a Controllable-Flow Particle Solar Receiver for High-Temperature Thermochemical Energy Storage

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

A new methodology of thermal performance improvement and numerical analysis of free-falling particle receiver

A Novel Impeded Flow Particle Receiver for Better Stability and Controllability

A Sliding-Bed Particle Solar Receiver with Controlling Particle Flow Velocity for High-Temperature Thermal Power Generation

Optical and Thermal Performance of a High-Temperature Spiral Solar Particle Receiver

Thermal Performance Analysis of Free-Falling Solar Particle Receiver and Heat Transfer Modelling of Multiple Particles

The performance evaluation of the free-falling particle solar receiver with a novel zigzag mass-flow controlled particle release pattern

A Review of Radiative Heat Transfer in Fixed-Bed Particle Solar Receivers

Design Evaluation of a Next-Generation High-Temperature Particle Receiver for Concentrating Solar Thermal Applications

Simulation and Experimental Study on a Spiral Solid Particle Solar Receiver

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Experimental and numerical investigation on thermal performance of a quartz tube solid particle solar receiver

Negative Thermal-Flux Phenomenon and Regional Solar Absorbing Coating Improvement Strategy for the Next-Generation Solar Power Tower

Optimization and performance evaluation of a high-temperature solar receiver for concentrated solar power applications

Receiver with Light-Trapping Nanostructured Coating: A Possible Way to Achieve High-Efficiency Solar Thermal Conversion for the Next-Generation Concentrating Solar Power

Thermal performance evaluation of a cavity receiver based on particle's radiation properties during the day time

On-sun testing of a 1 MWth quartz tube bundle solid particle solar receiver

A falling particle receiver thermal model for system-level analysis of solar tower plants

A Multi-Scale Solar Receiver with Peak Receiver Efficiency over 90% at 720 °C for the Next-Generation Solar Power Tower