Abstract:<p>The thermal performance of a quartz tube solid particle solar receiver (SPSR) with the gravity driven packed particles moving down in a semi-annular particle flow channel has been experimentally and numerically investigated, and the particle flow channel in the quartz tube was shaped by a ceramic fiber insert. The SPSR was heated by a solar simulator with 7 Xenon lamps at 130A electric current which generated a mean irradiant flux of 276 kW/m<sup>2</sup> on the 0.26 m irradiated length, grey ceramsite sand with the solar weighted absorptivity of 72.34% was used in the study. The experimental results with a 6 mm particle layer thickness indicated the particle temperature increase of 164 K and the thermal efficiency of 50.25%. A thinner particle layer thickness was shown to improve the thermal performance of the SPSR as verified both in the experiments and simulations. Although the particle temperature increase in a single pass was not high enough in the experiments, compared with other types of SPSR, this design obtained an advantageous particle temperature increase in per unit irradiation length. Moreover, the particle temperature increase in a single pass can be promoted by a longer irradiated length, and therefore the requirement for continuous recirculation of the solid particles will be decreased which can greatly reduce the required parasitic power. Besides, according to the numerical model, the thermal efficiency can be further improved by various means such as improving the solar weighted absorptivity of the solid particles, reducing the particle layer thickness, increasing particle mass flow rate and so on. A sensitive analysis illustrated that the mean particle diameter had the minimal impact on the thermal performance among the various influencing factors, but a value of greater than 700 μm was recommended based on the simulation results.</p>

Numerical investigations of structural modification and particle geometric parameters on the heat transfer performance of falling particle solar receiver

Thermal Performance Analysis of Free-Falling Solar Particle Receiver and Heat Transfer Modelling of Multiple Particles

A new methodology of thermal performance improvement and numerical analysis of free-falling particle receiver

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

Experimental and numerical investigation on thermal performance of a quartz tube solid particle solar receiver

Numerical study of free-falling particle receivers with curtain and particle interchange for high receiver efficiency and low temperature difference

Optical and Thermal Performance of a Novel Solar Particle Receiver

Numerical Investigation on Porous Media Heat Transfer in A Solar Tower Receiver

A Sliding-Bed Particle Solar Receiver with Controlling Particle Flow Velocity for High-Temperature Thermal Power Generation

A falling particle receiver thermal model for system-level analysis of solar tower plants

Experimental investigation on thermal characteristics of a novel mesh flat-plate heat receiver in a solar power tower system

Analysis on the Effects of Different Receiver Structures and Porous Parameters on the Volumetric Effects and Heat Transfer Performance of Porous Volumetric Solar Receiver

Numerical Study on Influence of Wind on Thermal Performance of a Solid Particle Solar Receiver

A CPFD simulation on the particle flow characteristics in a packed moving bed solar receiver with an added insert

Numerical Investigation on the Flow and Thermal Behaviors of the Volumetric Solar Receivers with Different Morphologies

Numerical Investigation of the Natural Convective Heat Loss of a Solar Central Cavity Receiver with Air Curtain

A Review of Radiative Heat Transfer in Fixed-Bed Particle Solar Receivers

A Novel Impeded Flow Particle Receiver for Better Stability and Controllability

Study on Heat Transfer and Stress Characteristics of the Pressurized Volumetric Receiver in Solar Power Tower System

The performance evaluation of the free-falling particle solar receiver with a novel zigzag mass-flow controlled particle release pattern

Numerical Investigation and Experimental Validation of the Impacts of an Inner Radiation Shield on Parabolic Trough Solar Receivers