Abstract:In this paper, a windowed receiver with a particle curtain is numerically simulated under full-spectrum conditions. The discrete phase model (DPM) is used to model the particle flow and interactions between the particle phase and the air phase. The scattering, absorption of the particle curtain and quartz glass window are considered in detail. The spectral characteristics of glass have an important influence on the heat transfer characteristics and the receiver efficiency. The results show that the quartz window can reduce the convective heat loss and the cavity re-radiation heat loss. Under the same conditions, the receiver efficiency of a windowed receiver with a particle curtain is increased by 11.9% compared with an aerowindow receiver with a particle curtain. Under the same mass flow, the particle curtain thickness and particle size have a non-negligible influence on the flow pattern and temperature distribution of the particle curtain. When the particle curtain thickness is low, the flow stability of the particle curtain is high; as the particle curtain thickness increases, the volume fraction of the particle curtain decreases, and the flow stability of the particle curtain decreases, which affects the shape of the curtain. The scattering and absorption characteristics of the particles are different, resulting in different net fluxes of incident radiation under the reflection of the particle curtain and the back wall. As the particle curtain thickness increases, the particle average exit temperature and the receiver efficiency show a trend of first increasing and then decreasing. When d = 30 mm, the incident radiation (G) at the position of the particle curtain is larger, the particle average exit temperature reaches 1156.72 K, and the receiver efficiency reaches 74.4%. Therefore, different particle sizes also have a significant impact on the flow pattern of the particle curtain and the radiation distribution inside it. In the range of 250–750 μm particle size, the particles average exit temperature reaches above 1150 K, and the receiver efficiency is above 72.6%. As the particle size increases, the particle average exit temperature, and the receiver efficiency show a trend of first decreasing and then increasing. When the particle size is 500 mm, the particle average exit temperature reaches 1175.8 K, and the receiver efficiency reaches 79.4%.

Numerical study of free-falling particle receivers with curtain and particle interchange for high receiver efficiency and low temperature difference

A new methodology of thermal performance improvement and numerical analysis of free-falling particle receiver

Numerical investigations of structural modification and particle geometric parameters on the heat transfer performance of falling particle solar receiver

A Novel Impeded Flow Particle Receiver for Better Stability and Controllability

Thermal Performance Analysis of Free-Falling Solar Particle Receiver and Heat Transfer Modelling of Multiple Particles

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

Optical and Thermal Performance of a Novel Solar Particle Receiver

The performance evaluation of the free-falling particle solar receiver with a novel zigzag mass-flow controlled particle release pattern

A Sliding-Bed Particle Solar Receiver with Controlling Particle Flow Velocity for High-Temperature Thermal Power Generation

A falling particle receiver thermal model for system-level analysis of solar tower plants

Study on Spectral Radiative Heat Transfer Characteristics of a Windowed Receiver with Particle Curtain

Numerical Study on Influence of Wind on Thermal Performance of a Solid Particle Solar Receiver

Heat Loss Reduction Approach in Cavity Receiver Design Based on Performance Investigation of a Novel Positive Conical Scheme

Thermal performance evaluation of a cavity receiver based on particle's radiation properties during the day time

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

The Effect of the Cooling Nozzle Arrangement to the Thermal Performance of a Solar Impinging Receiver

A Review of Radiative Heat Transfer in Fixed-Bed Particle Solar Receivers

A theoretical heat transfer analysis of different indirectly-irradiated receiver designs for high-temperature concentrating solar power applications

Experimental investigation on thermal characteristics of a novel mesh flat-plate heat receiver in a solar power tower system

Experimental Investigation of Thermal Performance Enhancement of Cavity Receiver with Bottom Surface Interior Convex

THE STUDY OF SEPARATED FUNCTION RFQ (SFRFQ) WITH DIAPHRAGMS