Abstract:Solar receiver, as the core device of the dish concentrated solar thermal power generation system, is becoming a research focus and has attracted much attention. High temperature heat pipe, which works by following the principle of vapor–liquid circulation, has the ability to flatten the temperature of the hot spot, and maintain excellent heat transfer performance with the illumination of concentrated facula with inhomogeneous ultra-high energy flux density; Through the structural design, the compressed air flows outside of the high temperature heat pipe, and thus, compared with flowing in the pipe, the heat transfer coefficient is increased and the flow resistance is reduced. In view of the above advantages, we designed a dish concentrated solar receiver with finned high temperature heat pipe as the core heat transfer device, prepared a high temperature heat pipe with a large length-diameter ratio, and conducted a quantitative performance study comprehensively and systematically. The present study verified the safety and stability of the high temperature heat pipe with the illumination of concentrated facula with inhomogeneous ultra-high energy flux density, theoretically analyzed the process of frozen start-up and heat transfer limits of high temperature heat pipe, explored the reasonable frozen start-up mode, carried out the parameter optimization and consecutive long-time operation stability test, and quantitatively verified the enhanced heat transfer capacity of finned high temperature heat pipe through the experiment. The results show that the HTHP prepared by the same process can operate safely and stably with the illumination of concentrated facula at the average energy flux density of 2.3 × 106 W/m2, and maintain a high temperature above 700 °C as well as excellent temperature uniformity, which fully verifies the feasibility and superiority of HTHP as the core heat transfer device of the dish concentrated solar receiver. In addition, these results can provide quantitative experimental data and theoretical reference for the design and development of the dish concentrated solar receiver.

Experimental investigation on thermal characteristics of a novel mesh flat-plate heat receiver in a solar power tower system

Thermal Characteristics of the Combined Flat Plate Heat Receiver in Solar Power Tower Plant

Thermal Characteristics of Grid Flat-Plate Heat Receiver in a Solar Power-Tower System

Experimental Investigate on Thermal Properties of A Novel High Temperature Flat Heat Pipe Receiver in Solar Power Tower Plant

Starting characteristics of a novel high temperature flat heat pipe receiver in solar power tower plant based of“Flat-front”Startup model

Negative Thermal-Flux Phenomenon and Regional Solar Absorbing Coating Improvement Strategy for the Next-Generation Solar Power Tower

Experimental study on heat transfer performance of high temperature heat pipe with large length-diameter ratio for heat utilization of concentrated solar energy

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Experimental studies on the flow and wall temperature distribution of solar cavity receiver under non-uniform heat flux

Transient Thermal Performance Response Characteristics of Porous-Medium Receiver Heated by Multi-Dish Concentrator

Numerical Investigation on Porous Media Heat Transfer in A Solar Tower Receiver

Comprehensive Experimental Testing and Analysis on Parabolic Trough Solar Receiver Integrated with Radiation Shield

Improving the Heat Transfer Performance of the Tower Molten Salt Solar Receiver with the Novel Folded Flow Tubes

Numerical Investigation and Experimental Validation of the Impacts of an Inner Radiation Shield on Parabolic Trough Solar Receivers

Heat Transfer Performance Evaluation of a Large-Size Cavity Receiver in the Solar Power Tower Plant Based on Angle Factors

Thermal Performance Characteristics of Porous Media Receiver Exposed to Concentrated Solar Radiation

Study on Heat Transfer and Stress Characteristics of the Pressurized Volumetric Receiver in Solar Power Tower System

Performance Analysis on a High-Temperature Solar Evacuated Receiver with an Inner Radiation Shield

Experimental Study Of The Thermal Performance Of Solar Cavity Receiver During Start-Up Process

Thermal Performance Investigation of a Novel Heating Terminal Integrated with Flat Heat Pipe and Heat Transfer Enhancement

Experimental Research on Heat Transfer Performance of Novel Radial Flat Heat Pipe