Abstract:Parabolic Trough Collectors (PTCs) are commonly employed in both industrial and residential settings for the purpose of harnessing solar energy. Several techniques have been implemented to improve performance, such as altering the geometry of the absorber tube, enhancing the selective coatings of the receiver envelope, and utilizing nanofluids . This study proposes a new method for enhancing the thermal-hydraulic efficiency of PTCs through the utilization of non-uniform heat flux distribution on conical solar receiver. The effectiveness of this approach is evaluated through numerical simulations conducted using Ansys Fluent with the aid of optical simulation performed using TracePro. The geometry under consideration is assessed at various diameter ratios (DR) spanning from 1.25 to 2 and Reynolds number ( Re ) ranging from 20000 to 100000, with increments of 20000. This evaluation is conducted at three distinct inlet temperatures : 150 °C, 250 °C, and 350 °C. The studied parameters include-the Nusselt number ( Nu ), friction coefficient ( f ), thermal efficiency ( ηth ), exergetic efficiency ( ηex ), and thermal enhancement factor (TEF). Furthermore, a comparative analysis is conducted between the newly proposed geometric design and a traditional straight absorber and glass structure. The findings indicated that a conical receiver generally enhances system heat transfer by a minimum of 7 % and up to 65 %, resulting in improved thermal and exergetic efficiencies. Decreasing the pipe outlet diameter from DR = 1.25 to DR = 2 led to a significant exponential rise in the friction coefficient. The TEF demonstrated that a diameter ratio of 1.25 and 1.5 resulted in maximum values of 1.19 and 1.11, respectively, at high Re and an inlet temperature of 350 °C. The results suggested that incorporating conical receivers in PTCs can greatly improve their performance. To minimize the friction coefficient and associated pumping power, it is crucial to carefully evaluate the reduction of the diameter of the absorber outlet. The results offered valuable insights for the development and improvement of PTCs in both industrial and power generation settings, promoting the adoption of renewable energy and supporting long-term sustainability.

Thermal-hydraulic performance analysis of a novel parabolic trough receiver with double tube for solar cascade heat collection

Performance analyses and heat transfer optimization of parabolic trough receiver with a novel single conical strip insert

Improving overall heat transfer performance of parabolic trough solar receiver by helically convex absorber tube

Thermal performance analysis of eccentric double-selective-coated parabolic trough receivers with flat upper surface

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Performance Analysis on a High-Temperature Solar Evacuated Receiver with an Inner Radiation Shield

A novel parabolic trough receiver by inserting an inner tube with a wing-like fringe for solar cascade heat collection

Hydrothermal performance assessment of a parabolic trough with proposed conical solar receiver

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Energetic and Exergetic Analyses on Structural Optimized Parabolic Trough Solar Receivers in a Concentrated Solar–thermal Collector System

Performance Enhancement of Parabolic Trough Collector by Using Homogenizer and Spiral

Analysis of Heat Transfer Performance of the Absorber Tube with Convergent-Divergent Structure for Parabolic Trough Collector

A Design Method and Numerical Study for a New Type Parabolic Trough Solar Collector with Uniform Solar Flux Distribution

Effect of receiver diameter ratio on thermal performance of natural circulation steam generation system as applied to parabolic trough collector using water as working fluid

Thermal performance of parabolic trough solar collector employing novel absorber tubes equipped with distinct heat transfer fluids: An experimental study

Thermal performance investigation of the newly shaped vacuum tubes of parabolic trough collector system

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Numerical Study on Heat Transfer Enhancement in a Receiver Tube of Parabolic Trough Solar Collector with Dimples, Protrusions and Helical Fins

Techno-economic Assessment of Performance-Enhanced Parabolic Trough Receiver in Concentrated Solar Power Plants

Multi-scale Numerical Analysis of Flow and Heat Transfer for a Parabolic Trough Collector

A coupled optical-thermal-fluid-mechanical analysis of parabolic trough solar receivers using supercritical CO2 as heat transfer fluid