Abstract:<p>The thermal performance of a quartz tube solid particle solar receiver (SPSR) with the gravity driven packed particles moving down in a semi-annular particle flow channel has been experimentally and numerically investigated, and the particle flow channel in the quartz tube was shaped by a ceramic fiber insert. The SPSR was heated by a solar simulator with 7 Xenon lamps at 130A electric current which generated a mean irradiant flux of 276 kW/m<sup>2</sup> on the 0.26 m irradiated length, grey ceramsite sand with the solar weighted absorptivity of 72.34% was used in the study. The experimental results with a 6 mm particle layer thickness indicated the particle temperature increase of 164 K and the thermal efficiency of 50.25%. A thinner particle layer thickness was shown to improve the thermal performance of the SPSR as verified both in the experiments and simulations. Although the particle temperature increase in a single pass was not high enough in the experiments, compared with other types of SPSR, this design obtained an advantageous particle temperature increase in per unit irradiation length. Moreover, the particle temperature increase in a single pass can be promoted by a longer irradiated length, and therefore the requirement for continuous recirculation of the solid particles will be decreased which can greatly reduce the required parasitic power. Besides, according to the numerical model, the thermal efficiency can be further improved by various means such as improving the solar weighted absorptivity of the solid particles, reducing the particle layer thickness, increasing particle mass flow rate and so on. A sensitive analysis illustrated that the mean particle diameter had the minimal impact on the thermal performance among the various influencing factors, but a value of greater than 700 μm was recommended based on the simulation results.</p>

Simulation and Experimental Study on a Spiral Solid Particle Solar Receiver

Optical and Thermal Performance of a High-Temperature Spiral Solar Particle Receiver

Experimental and Simulation Study of Mn–Fe Particles in a Controllable-Flow Particle Solar Receiver for High-Temperature Thermochemical Energy Storage

Design, Simulation and On-Sun Experiments of a Modified Sliding-Bed Particle Solar Receiver for Coupling with Tower Concentrating System

Simulation and Experimental Study of an Air Tube-Cavity Solar Receiver

Optical and Thermal Performance of a Novel Solar Particle Receiver

Modeling and dynamic simulation of receiver in a solar tower power station

Experimental Study on Thermal Performance of a Water/steam Cavity Receiver with Solar Simulator

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Experimental and numerical investigation on thermal performance of a quartz tube solid particle solar receiver

Numerical simulation of the heat flux distribution in a solar cavity receiver

A Sliding-Bed Particle Solar Receiver with Controlling Particle Flow Velocity for High-Temperature Thermal Power Generation

Thermal Performance Analysis of Free-Falling Solar Particle Receiver and Heat Transfer Modelling of Multiple Particles

Numerical Simulation of a Lab-Scale Molten-Salt External Solar Receiver and Its Experimental Validation

Simulation of Optical Performance for a Solar Cavity Receiver Arranged with Spiral Tubes

Experimental and Numerical Evaluation of a Lab-Scale External Solar Receiver

PERFORMANCE SIMULATION OF SOLAR CAVITY RECEIVER

On-sun testing of a 1 MWth quartz tube bundle solid particle solar receiver

Solar-thermal conversion investigation using surface partition method for a cavity receiver with helical pipe

Numerical Investigation and Experimental Validation of the Impacts of an Inner Radiation Shield on Parabolic Trough Solar Receivers

A Review of Radiative Heat Transfer in Fixed-Bed Particle Solar Receivers