Abstract:Based on heat conduction theory,a finite element method is introduced to investigate the three-dimensional transient temperature fields in a moving plate irradiated by a laser beam.The laser beam is assumed to be with Gaussian distribution,and the plate is considered as infinite along the motion direction,while the width and the height are finite.Considering the thermal physical parameters depended on temperature,convection and radiation factors of the surfaces,and the motion of the plate,the temperature fields on the upper and bottom surfaces of the plate are obtained.The numerical results show that the quasi-steady state temperature fields are approached.Comparing the temperature fields obtained by before and after considering the factors described above,it shows that the temperature dependences of the thermal properties of the material have distinct influences on the temperature fields.In the conditions that the thermal conductivity and thermal capacity of the material are dependent of temperature,the results are presented for two cases:(1) when neglecting temperature dependence of the thermal capacity,the maximum temperature and the quasi-steady state temperature are both higher than those of considering the temperature dependence;(2) when neglecting temperature dependence of the thermal conductivity,the maximum temperature will decrease while the quasi-steady state temperature will be the same as that of considering the temperature dependence.In addition,with increasing the convective heat transfer coefficient at the upper surface,the maximum temperature and the quasi-steady state temperature will decrease,while the effect of radiative heat losses of the surface can be ignored.Meanwhile,changing the moving velocity not only affects the temperature fields,but also alters the maximum temperature and the time for reaching the quasi-steady state condition.Furthermore,with the radius of the laser source decreasing,the maximum temperature and quasi-steady state temperature will both increase,while the former change is more obvious.

Thermal analysis of a reflection mirror by fluid and solid heat transfer method

Multi‐segment cooling design of a reflection mirror based on the finite‐element method

Influence of temperature on infrared optical system and athermal design

Thermal optimization of a high heat load liquid-metal-bath cooled mirror at the Hefei Advanced Light Facility

Laser-induced Heating of Mid-Infrared High Reflectance Coatings

Fundamental Study of Wave Propagation on Liquid Surface Related IFE Mirror

Research on the Particular Temperature-Induced Surface Shape of a National Ignition Facility Deformable Mirror

Thermal loading on crystals in an X-ray free-electron laser oscillator

Thermal integration analysis of optical machines for space-based laser communications

Optimization design of microchannel heat sink geometry for high power laser mirror

Effect of the Particular Temperature Field on A National Ignition Facility Deformable Mirror

A hybrid surface shape control method for optimizing thermal deformation of FEL reflection mirror

Optimization of Thermal Control Design for Aerial Reflective Opto-Mechanical Structure

Orthogonal study and analysis of variance on a thermal management system for high-power LED package.

Application of Athermalisation in Optical Systems

Thermal and structural analyses on different mirrors of the Multi-Beam Transmission Line of DTT ECH system

A thermo-optical test device utilizing the 100-m x-ray test facility

Thermal control of primary mirror of Space Solar Telescope

Finite element analyses of temperature fields in moving solids irradiated by a laser source

Mirror Deformation and Zero Thermal Expansion Temperature Shift in Optical Cavity due to Radiative Heating

Thermal and fluid dynamic analysis of a flat manifold microchannel heat sink in parabolic trough solar collector with optical errors