Abstract:Thermal management has become one of the critical problems in high-power laser systems. The laser crystal, which dissipates a heat flux over 150 W/cm2, is the most challenging component when solving the thermal problem. In this work, a specialized central-jetting microchannel heat sink (MCHS) is proposed purposely for a small-size laser crystal with high heat fluxes. Considering the space constraint and installation restriction, the MCHS has a narrow width to fit with the laser crystal, while its length is extended to enhance the heat dissipation capability. The MCHS is integrated by welding the two layers completely through a vacuum brazing method. Central-jetting impingement is introduced to enhance the cooling efficiency. Coolant is flushed vertically into the microchannel layer toward the central heating region where the heating source is attached at the central bottom of the MCHS. We conduct a parametric study on the thermal performance of the MCHS by experiments. The overall heat transfer coefficient of the MCHS achieves 50 × 103 W/(m2•K), and the average heat transfer coefficient of the microchannel reaches 21.5 × 103 W/(m2•K). The surface temperature of the heating head is controlled below 65 °C, and the temperature variation is less than 5 °C. In the solid bottom of the MCHS, thermal resistance in vertical direction is over 1.8 times of that in the horizontal direction, ensuring an efficient heat dissipation in the extended volume. The local heat transfer characteristics are further examined through additional numerical simulations. The wall temperature of the microchannel and the local heat transfer coefficient have a high plateau in the heating region, and then drop significantly along the flow direction. Due to heat transfer enhancement by jet impingement, the heat transfer coefficient in the central region is generally 15% higher than that averaged on the full microchannel.

Optimization design of microchannel heat sink geometry for high power laser mirror

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Design of Ultrabroadband Double-Chirped Mirror Pairs for Ultrafast Lasers

Multi‐segment cooling design of a reflection mirror based on the finite‐element method

Thermal optimization of a high heat load liquid-metal-bath cooled mirror at the Hefei Advanced Light Facility

Numerical Research on Microchannel Cooling Structure of High Power Solid-State Lasers

The Effect of Geometric Parameters on Flow and Heat Transfer Characteristics of a Double-Layer Microchannel Heat Sink for High-Power Diode Laser

Thermal performance of a central-jetting microchannel heat sink designed for a high-power laser crystal

Design of Microchannel Heat Sink Using Topology Optimization for High Power Modules Cooling

Optimization of Heat-Dissipation Structure of High-Power Diode Laser in Space Environments

Optomechanical analysis of the mounting performance of large laser transport mirrors

Vascularized Liquid Metal Cooling for Thermal Management of Kw High Power Laser Diode Array

Experimental and numerical study on the hydrothermal performances of a mirror Y-shaped convergent mini-channel heat sink

Thermal design for the package of high-power single-emitter laser diodes

Heat Transfer Performance and Structural Optimization of a Novel Micro-channel Heat Sink

Thermal analysis of a reflection mirror by fluid and solid heat transfer method

Heat transfer optimization based on finned microchannel heat sink

Fabrication of micro pin fins on inclined V-shaped microchannel walls via laser micromilling

Back-support large laser mirror unit: mounting modeling and analysis

Numerical Analysis of Microchannels Designed for Heat Sinks

Computational Study and Optimization of Laminar Heat Transfer and Pressure Loss of Double-Layer Microchannels for Chip Liquid Cooling