Abstract:Thermal management has become one of the critical problems in high-power laser systems. The laser crystal, which dissipates a heat flux over 150 W/cm2, is the most challenging component when solving the thermal problem. In this work, a specialized central-jetting microchannel heat sink (MCHS) is proposed purposely for a small-size laser crystal with high heat fluxes. Considering the space constraint and installation restriction, the MCHS has a narrow width to fit with the laser crystal, while its length is extended to enhance the heat dissipation capability. The MCHS is integrated by welding the two layers completely through a vacuum brazing method. Central-jetting impingement is introduced to enhance the cooling efficiency. Coolant is flushed vertically into the microchannel layer toward the central heating region where the heating source is attached at the central bottom of the MCHS. We conduct a parametric study on the thermal performance of the MCHS by experiments. The overall heat transfer coefficient of the MCHS achieves 50 × 103 W/(m2•K), and the average heat transfer coefficient of the microchannel reaches 21.5 × 103 W/(m2•K). The surface temperature of the heating head is controlled below 65 °C, and the temperature variation is less than 5 °C. In the solid bottom of the MCHS, thermal resistance in vertical direction is over 1.8 times of that in the horizontal direction, ensuring an efficient heat dissipation in the extended volume. The local heat transfer characteristics are further examined through additional numerical simulations. The wall temperature of the microchannel and the local heat transfer coefficient have a high plateau in the heating region, and then drop significantly along the flow direction. Due to heat transfer enhancement by jet impingement, the heat transfer coefficient in the central region is generally 15% higher than that averaged on the full microchannel.

Vascularized Liquid Metal Cooling for Thermal Management of Kw High Power Laser Diode Array

A Liquid Metal Cooling System for the Thermal Management of High Power LEDs

Optimization of Heat-Dissipation Structure of High-Power Diode Laser in Space Environments

Design And Simulation Of Locally Enhanced Microchannel Heat Sink For Diode Partially Pumped Slab Laser

Wavelength-stable 1.1 kW diode laser array cooled by liquid metal

Hybrid Liquid Metal–water Cooling System for Heat Dissipation of High Power Density Microdevices

Application Research of Phase Change Material Heat Removal Technology for Compact High Efficiency Diode Pumped Laser

Liquid Metal Alloy Based Vascular-Like Microchannel Networks For The Thermal Management Of Electronics

Laser Microstructuring of Extremely-Thin Vapor Chamber with Hybrid Configuration for Excellent Heat Dissipation

Thermal Analysis of a Novel Compact Packaged Passively Cooled Laser Diode Array

Microchannel Heat Sink with High Thermal Conductivity Path for Diode Partially End-Pumped Slab Laser

High Power Conductively Cooled Laser Diode Array Operating under Hard Pulse Condition

A Novel Coaxial Air-R134a Spray Cooling for Heat Transfer Enhancement of Laser Dermatology

Numerical simulation of thermo-mechanical behavior in high power diode laser arrays

Development and Evaluation of a Supersized Aluminum Flat Plate Heat Pipe for Natural Cooling of High Power Telecommunication Equipment

Numerical Research on Microchannel Cooling Structure of High Power Solid-State Lasers

An Immersed Jet Array Impingement Cooling Device with Distributed Returns for Direct Body Liquid Cooling of High Power Electronics

Thermal performance of a central-jetting microchannel heat sink designed for a high-power laser crystal

Study on Hydrodynamic Effects in Longitudinal Forced Convection for High Power Laser Amplifier

An additively manufactured manifold-microchannel heat sink for high-heat flux cooling

Design of Practical Liquid Metal Cooling Device for Heat Dissipation of High Performance Cpus