Abstract:Owing to their good diffusion cooling and low sensitivity to misalignment, slab-shape negative-branch unstable-waveguide resonators are widely used for high-power lasers in industry. As the output beam of the resonator is astigmatic, an external beam shaping system is required. However, the transverse dimension of the cavity mirrors in the resonator is large. For a long-time operation, the heating of cavity mirrors can be non-uniform. This results in micro-deformation and a change in the radius of curvature of the cavity mirrors, and leads to an output beam of an offset optical axis of the resonator. It was found that a change in the radius of curvature of 0.1% (1 mm) caused by thermal deformation generates a transverse displacement of 1.65 mm at the spatial filter of the external beam shaping system, and an output power loss of more than 80%. This can potentially burn out the spatial filter. In order to analyze the effect of the offset optical axis of the beam on the external optical path, we analyzed the transverse displacement and rotational misalignments of the spatial filter. For instance, if the transverse displacement was 0.3 mm, the loss in the output power was 9.6% and a sidelobe appeared in the unstable direction. If the angle of rotation was 5°, the loss in the output power was 2%, and the poles were in the direction of the waveguide. Based on these results, by adjusting the bending mirror, the deviation angle of the output beam of the resonator cavity was corrected, in order to obtain maximum output power and optimal beam quality. Finally, the propagation characteristics of the corrected output beam were analyzed.

Mirror Deformation and Zero Thermal Expansion Temperature Shift in Optical Cavity due to Radiative Heating

Influence of temperature on infrared optical system and athermal design

Laser-induced Heating of Mid-Infrared High Reflectance Coatings

Influence of Thermal Deformation in Cavity Mirrors on Beam Propagation Characteristics of High-Power Slab Lasers

Effect of the Particular Temperature Field on A National Ignition Facility Deformable Mirror

Fundamental Study of Wave Propagation on Liquid Surface Related IFE Mirror

Research on the Particular Temperature-Induced Surface Shape of a National Ignition Facility Deformable Mirror

Degradation of Ta$_2$O$_5$ / SiO$_2$ Dielectric Cavity Mirrors in Ultra-High Vacuum

Lateral Beam Shifts and Depolarization Upon Oblique Reflection from Dielectric Mirrors

Effect of interference on thermal noise and coating optimization in dielectric mirrors

Optomechanical Cavity with a Buckled Mirror

Photothermal effects in ultra-precisely stabilized tunable microcavities

Cavity Quantum Electrodynamics with Frequency-Dependent Reflectors

Optomechanical trapping and cooling of partially transparent mirrors

Photothermal and thermo-refractive effects in high reflectivity mirrors at room and cryogenic temperature

Brownian thermal birefringent noise due to non-diagonal anisotropic photoelastic effect in multilayer coated mirrors

Thermal analysis of a reflection mirror by fluid and solid heat transfer method

Cavity Gain Drop Caused by Revisited Gouy Phase

Radiation Pressure Induced Oscillations of an Optically Levitating Mirror

Effects of mirror birefringence and its fluctuations to laser interferometric gravitational wave detectors

Research On The Characteristics, Mechanism And Compensation Method Of The Temperature-Induced Surface Distortion Of Deformable Mirror