Abstract:Thermal annealing plays a key role in optimizing the properties of amorphous optical coatings. In the field of gravitational wave detection (GWD), however, the effects of annealing protocols on the interferometry mirror coatings have been explored primarily by ex post analysis. As a result, the dynamics of the coatings properties during annealing is still poorly known, potentially leading to suboptimal performance. Here, using real-time, in situ spectroscopic ellipsometry (SE) we have tracked the refractive index and thickness of a titania-tantala coating during controlled annealing. We have tested the material and the annealing protocol used in current GWD mirrors. The annealing cycle consisted of a heating ramp from room temperature to 500 °C, followed by a 10-hour plateau at the same temperature and the final cooling ramp. SE measurements have been run continuously during the entire cycle. Significant variations in the thickness and refractive index, which accompany the coating structural relaxation, have been recorded during the heating ramp. These variations start around 200 °C, slightly above the deposition temperature, and show an increased rate in the range 250-350 °C. A smaller, continuous evolution has been observed during the 10-hour high-temperature plateau. The results offer suggestions to modify the current annealing protocol for titania-tantala coatings, for example by increasing the time duration of the high-temperature plateau. They also suggest an increase in the substrate temperature at deposition. The approach presented here paves the way for systematic, real-time investigations to clarify how the annealing parameters shape the properties of optical coatings, and can be leveraged to define and optimize the annealing protocol of new candidate materials for GWD mirrors.

Photothermal and thermo-refractive effects in high reflectivity mirrors at room and cryogenic temperature

Laser-induced Heating of Mid-Infrared High Reflectance Coatings

Photo-Thermal Transfer Function of Dielectric Mirrors for Precision Measurements

Excess noise and photo-induced effects in highly reflective crystalline mirror coatings

Effect of interference on thermal noise and coating optimization in dielectric mirrors

Thermo-optic noise in coated mirrors for high-precision optical measurements

Thermal noises and noise compensation in high-reflection multilayer coating

Brownian thermal birefringent noise due to non-diagonal anisotropic photoelastic effect in multilayer coated mirrors

Mirror thermal noise in laser interferometer gravitational wave detectors operating at room and cryogenic temperature

Effects of mirror birefringence and its fluctuations to laser interferometric gravitational wave detectors

Mid-infrared supermirrors with finesse exceeding 400 000

Mechanical loss in state-of-the-art amorphous optical coatings

The photothermal effect in interferometers

Modeling and Characterizing Transmission Windows for In-Situ Interferometric Measurements of Cryogenically Cooled Mirrors

Optical and mechanical properties of ion-beam-sputtered Nb$_2$O$_5$ and TiO$_2$-Nb$_2$O$_5$ thin films for gravitational-wave interferometers

Strategies to reduce the thermoelastic loss of multimaterial coated finite substrates

Measurements of mechanical thermal noise and energy dissipation in optical dielectric coatings

Tenfold reduction of Brownian noise in optical interferometry

Monitoring the evolution of optical coatings during thermal annealing with real-time, in situ spectroscopic ellipsometry

High-performance near- and mid-infrared crystalline coatings