Abstract:The EU-DEMOnstration fusion power plant (DEMO) first wall protection strategy relies on limiter components to face both normal and off-normal plasma transient events. The heat loads during these events are likely to damage the breeding blanket’s first wall otherwise. Since W is the preferred plasma-facing material for EU-DEMO, the plasma-facing component design of the limiters follows considerations based on heat transfer in solids undergoing phase transition. The understanding of this problem has paved the way for a 1-D thermal modeling in MATLAB Thermal Analysis foR Tracking InterFaces under meLting&vaporizaTion-induced plasma Transient Events (TARTIFL&TTE), which has then been improved and extended to 3-D geometries within a Multiphysics environment. Hence, the 3-D TARTIFL&TTE implementation in COMSOL Multiphysics. Although the validation has already started against some data available in the literature and described in the companion paper, dedicated experiments are performed in the Garching LArge DIvertor Sample Test Facility (GLADIS) for melting studies. Carried out as a joint activity between EUROfusion and U.K. Atomic Energy Authority (UKAEA), the aim of these experiments is generating a traceable and controlled experimental database in support of heat transfer studies in solid components undergoing phase transition. The data are here used in support of the 3-D TARTIFL&TTE validation benchmark. To broaden the database, three different materials are chosen, i.e., TZM, W, and SS-316 grade. The requirements defining the experiments comply with the hypotheses behind 3-D TARTIFL&TTE, for it to be able to reproduce the experiments. Therefore, a uniform heat flux on the loaded surface is provided by the H neutral beam on the footprint, and loading time and heat flux magnitude are chosen such that only melting is reached. This allows the liquid metal to stay in place once formed. No attempts to reach vaporization are made, since the vertical position of the target promotes the molten layer sliding under gravity effects. Measured and modeled results (temperature, absorbed energy, and melt layer depth) show good agreement during the melting phase. As a stepwise benchmark, validation will be also sought under vaporization events. Future work is focused on addressing this last point.

Thermal and structural analyses on different mirrors of the Multi-Beam Transmission Line of DTT ECH system

Preliminary thermal and structural analyses on the parabolic mirror of the Multi-Beam Transmission Line of the DTT ECH system

Pre-conceptual design of the fixed mirrors for the DEMO Electron Cyclotron Heating antenna

First principle-based multi-channel integrated modelling in support of the design of the Divertor Tokamak Test facility

Thermo-mechanical and Quasi-Optical Analysis of the ECRH Equatorial Launcher Steerable Mirror Towards the CFETR

Preliminary Design and Thermo-Mechanical Analysis of the ECRH Equatorial Launcher Focusing Mirror (M1) Towards the CFETR

Computational Thermal-Fluid Dynamics analyses of borated water distribution in the Vacuum Vessel of the Divertor Tokamak Test facility

High Heat Flux Tests in Support of the 3-D Computational Modeling of Melting for the EU-DEMO First Wall Limiters

Time-dependent full-radius integrated modeling of the DTT tokamak main plasma scenarios

Multi-staged ERO2.0 simulation of material erosion and deposition in recessed mirror assemblies in JET and ITER

Thermal and structural analysis of JT-60SA actively cooled divertor target submitted to high heat flux

The Spherical and Lemon Hyperlens Grids Concept Applied to the DTT Neutral Beam Injector

Thermal optimization of a high heat load liquid-metal-bath cooled mirror at the Hefei Advanced Light Facility

Thermal analysis of a reflection mirror by fluid and solid heat transfer method

Optical Design of Vertical Edge Thomson Scattering on HL-2M Tokamak

Pre-conceptual design of the steering mirror for the DEMO electron cyclotron heating system

Electron Kinetic Effects on Interferometry, Polarimetry and Thomson Scattering Measurements in Burning Plasmas (Invited).

A New Design of Launcher Mirror for EAST Electron Cyclotron Resonance Heating System

Theoretical and Global Simulation Analysis of Collisional Microtearing

Numerical Study on Thermal Deformation of Wolter-I Focusing Telescope

Electron Kinetic Effects on Optical Diagnostics in Fusion Plasmas