Abstract:Different symmetry phases are identified in PbZr0.6Ti0.4O3 ferroelectric thin films as function of the strain introduced by CaF2, SrTiO3 and PMN‐PT substrates. Measured strain‐temperature paths are successfully described by a multi‐domain LGD‐model that predicts the symmetry phases and phase transitions, and the observed enhanced piezoelectricity in one of the phases. Lead based bulk piezoelectric materials, e.g., PbZrxTi1‐xO3 (PZT), are widely used in electromechanical applications, sensors, and transducers, for which optimally performing thin films are needed. The results of a multi‐domain Landau–Ginzberg‐Devonshire model applicable to clamped ferroelectric thin films are used to predict the lattice symmetry and properties of clamped PZT thin films on different substrates. Guided by the thermal strain phase diagrams that are produced by this model, experimentally structural transitions are observed. These can be related to changes of the piezoelectric properties in PZT(x = 0.6) thin films that are grown on CaF2, SrTiO3 (STO) and 70% PbMg1/3Nb2/3O3‐30% PbTiO3 (PMN‐PT) substrates by pulsed laser deposition. Through temperature en field dependent in situ X‐ray reciprocal space mapping (RSMs) and piezoelectric force microscopy (PFM), the low symmetry monoclinic phase and polarization rotation are observed in the film on STO and can be linked to the measured enhanced properties. The study identifies a monoclinic ‐rhombohedral MC‐MA‐R crystal symmetry path as the polarization rotation mechanism. The films on CaF2 and PMN‐PT remain in the same symmetry phase up to the ferroelectric‐paraelectric phase transition, as predicted. These results support the validity of the multi‐domain model which provides the possibility to predict the behavior of clamped, piezoelectric PZT thin films, and design films with enhanced properties.

Ferroelectric PbZr$_{1-x}$Ti$_x$O$_3$ by ethylene glycol-based chemical solution synthesis

Top-Seeded Solution Growth And Properties Of High T-C Pb(In1/2nb1/2)O-3-Pb(Zn1/3nb2/3)O-3-Pbtio3 Single Crystals

Crystallization, phase evolution and ferroelectric properties of sol-gel-synthesized Ba(Ti0.8Zr0.2)O3-x(Ba 0.7Ca0.3)TiO3 thin films

Sol‐Gel Routes to Nanostructured Patterned Ferroelectric Thin Films with Novel Electronic and Optical Functions

The Microstructure and Ferroelectric Properties of PbZr0.52Ti0.48O3 Films on Mica Substrates

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Growth and ferroelectric properties of sol-gel derived Pb(Zr,Ti)O3 using inorganic zirconium precursor

Epitaxial growth of (PbZr)TiO3 films on LaAlO3 by sol-gel method using inorganic zirconium source

Sol-gel synthesis and multiferroic properties of pyrochlore-free Pb(Fe0.5Nb0.5)O3 thin films

Preparation on the [(Pb,La) (Zr,Ti)O3] ferroelectric thin films by using the Sol-Gel processing

Optimization of the production process of BZT–BCT sol–gel thin films obtained from a highly stable and green precursor solution

Interface and Surface Characterization of Lead Zirconate Titanate Thin Films Grown by Sol–Gel Method

Study of silicon-based ferroelectric thin films prepared by Sol-Gel method

Ferroelectric and Piezoelectric Properties of Ba(Ti0.89Sn0.11)O3 Thin Films Prepared by Sol–gel Method

Dielectric Properties of Oriented PbZrO3 Thin Films Grown by Sol-Gel Process

THE PROCESSING EFFECTS ON STRUCTURE AND PROPERTIES OF SOL-GEL DERIVED PLZT FERROELECTRIC THIN FILMS

Fabrication of Lead-Free Bi0.5Na0.5TiO₃ Thin Films by Aqueous Chemical Solution Deposition

Enhanced Piezoelectricity by Polarization Rotation through Thermal Strain Manipulation in PbZr0.6Ti0.4O3 Thin Films

Structural, Dielectric and Piezoelectric Properties of (bi0.5na0.5)tio3–(bi0.5k0.5)tio3–bi(zn0.5ti0.5)o3 Thin Films Prepared by Sol–gel Method

Very-low temperature synthesis of pure and crystalline lead-free Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramic

Large Piezoelectric Effect in a Lead-Free Molecular Ferroelectric Thin Film