Abstract:In a class of high quality (Q-) factor dielectric resonators with low radiative losses, including popular whispering-gallery mode (WGM) resonators with high azimuthal mode numbers, due to high confinement of modal field in dielectric, the Q-factor is limited by the value of inverse dielectric loss tangent of dielectric material. Metal enclosures necessary for device integration only marginally affect the Q-factor while eliminating the residual radiative loss and allowing the optimization of input and output coupling. While very high Q-factors ∼200000 are available in sapphire WGM resonators in X-band, at millimeter wave frequencies increasing dielectric loss limits the Q-factor to much smaller values, e.g. ∼50000 and ∼25000 for quasi-TE and quasi-TM modes, correspondingly, at 36 GHz. The use of distributed Bragg reflection (DBR) principle allows to push modal energy outside dielectric while also isolating it from Joule losses in metallic enclosure walls. Very high Q∼600000>tgδ has been demonstrated in X-band [C. A. Flory and R. C. Taber, IEEE Trans. Ultrason., Ferroelectr., Freq. Control 44, 486–495 (1997).] at the expense of impractically large dimensions. In this work, we report on the assembly and testing of a compact Ka-band sapphire distributed Bragg reflector cavity characterized with Q-factor seven times larger than one predicted by the material’s dielectric loss at the frequency of interest. An intrinsic Q-factor of ∼200000 is demonstrated at 36 GHz for the lowest order TM-mode of a sapphire DBR. The resonator has 50 cm3 volume, smaller than previously demonstrated DBRs.

High-Q X-band distributed Bragg resonator utilizing an aperiodic alumina plate arrangement

Compact high-Q Ka-band sapphire distributed Bragg resonator

Diffractive Broadband Coupling into High-Q Resonant Cavities

A High Quality Factor, 19-GHz Periodically Poled AlScN BAW Resonator Fabricated in a Commercial XBAW Process

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Fabrication and characterization of a wide-bandgap and high-Q terahertz distributed-Bragg-reflector micro cavities

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

422 Million intrinsic quality factor planar integrated all-waveguide resonator with sub-MHz linewidth

X-Band Bulk Acoustic Wave Resonators with High Figure of Merit Based on Al0.8Sc0.2N

An Improved Surface-Plasmonic Nanobeam Cavity for Higher Q and Smaller V

18 GHz Solidly Mounted Resonator in Scandium Aluminum Nitride on SiO2/Ta2O5 Bragg Reflector

Monocrystalline AlGaAs heterostructures for high-reflectivity high-Q micromechanical resonators in the MHz regime

C-Band Lithium Niobate on Silicon Carbide SAW Resonator With Figure-of-Merit of 124 at 6.5 GHz

Study of High-Q Laterally Excited Bulk Wave Resonator with Smaller Gap-width Reflectors

Photonic crystal nanobeam cavity strongly coupled to the feeding waveguide

Single Crystal Bulk Acoustic Resonator for 5 GHz and High-Power Applications

High Quality Factor Surface Fabry-Perot Cavity of Acoustic Waves

High-performance SH-SAW resonator using optimized 30 degrees YX-LiNbO3/SiO2/Si

Use of periodic 2D pillar array for performance enhancement of AlN-based SMR BAW resonators

Anchor Loss Reduction of Lamb Wave Resonator by Pillar-Based Phononic Crystal

An X-Band Reflectarray with Novel Elements and Enhanced Bandwidth