Abstract:In this paper,a kind of zero refractive index material(ZRM)based on metal wire array model was designed and manufactured.A simulation experiment was carried out to get the S parameter of this material and then an S parameter retrieved method was used to retrieve the effective index of refraction of the material.It turns out that at 9.40 GHz the real part of effective index of refraction of the material is 0.05,the imaginary part of effective index of refraction of the material is 0.019,which is very close to zero.A waveguide simulation experiment was performed to test whether the material had the characteristic of zero refractive index material at 9.40 GHz,and its result shows that the material do have the characteristic of zero refractive index material at that frequency.Zero refractive index material flat slab can be seen as a directional filter which can only allow normal light to pass,so this characteristic can be used to improve the directivity of horn antenna.A horn antenna model was built and the zero refractive index material was added on the horn mouth.After simulation,the result turned out to be that the zero refractive index material has improvement in directivity of horn antenna.The antenna''s E-plan half power beam width has decreased from 18.0° to 17.6°,E-plan side lobe has decreased from-8.6 dB to-19.5 dB,H-plan half power beam width has decreased from 18.1° to 13.4°,E-plan side lobe has decreased from-26.0 dB to-27.1 dB,gain has increased from 19.7 dB to 21.1 dB,and the waveform of electromagnetic wave which exited from horn antenna approximates plan wave.Then Printed circuit method was used to manufacture the zero refractive index material and the material was added on the horn antenna which had the same size of the horn antenna built before.A simple electromagnetic measuring device was used to carry out a contrast experiment.The result of the contrast experiment showed that the zero refractive index material do have improvement in directivity of horn antenna.

Near-zero-index-featured Multi-band Highly Directional Radiator with Large Purcell Factors

Phase-tuning Metasurface for Circularly Polarized Broadside Radiation in Broadband

Zero-index Metamaterial Based All-Dielectric Nanoantenna

Enhanced High-gain Antenna Design with Phase-Controlled Frequency Selective Rasorber for LowRCS Performance

A Planar Zero-Index Metamaterial for Directive Emission

Implementation of a 2-D Reconfigurable Fresnel-Zone-Plate Antenna

High-permittivity Ceramics Enabled Highly Homogeneous Zero-Index Metamaterials for High-Directivity Antennas and Beyond

Geometry-independent antenna based on Epsilon-near-zero medium

Highly tunable ultra-narrow-resonances with optical nano-antenna phased arrays in the infrared

Design and Experiment of a Near-Zero-Thickness High-Gain Transmit-Reflect-Array Antenna Using Anisotropic Metasurface

High-Directivity Antenna Based on Highly Homogeneous Zero-Index Metamaterial

All-Dielectric Dual-Band Anisotropic Zero-Index Materials

Near‐Zero Thermal Expansion Ba 1− x Sr x Zn 2 Si 2 O 7 ‐Based Microwave Dielectric Ceramics for 3D Printed Dielectric Resonator Antenna with Integrative Lens

Effective Epsilon-Near-Zero (ENZ) Antenna Based on Transverse Cutoff Mode

Low-loss Beam Synthesizing Network Based on Epsilon-near-zero (ENZ) Medium for On-Chip Antenna Array

Integrated epsilon-near-zero antenna for omnidirectional radiation

A Wideband High-Efficiency Compact Fabry–Pérot Resonant Antenna With Multilayer Partially Reflective Surface

A Millimeter-Wave 48% Bandwidth High-Gain 3D-Printed Antenna Array Using T-Junctions with Multiple Reflection Nulls

An ENZ-Inspired Antenna with Controllable Double-Difference Radiation Pattern

Using zero refractive index materials to improvethe directivity of horn antenna

Acoustic Zero-Index Metamaterials for Leaky-Wave Antennas