Abstract:Frequency selective surface (FSS) has extensively been investigated over the past decades. The most famous applications of FSS are used for antennas radome and controlling radar cross section (RCS). FSS radome could reflect the signal out of the band so that the RCS could be reduced by shaping. However, with the development of radar detection technology, the scattering out of the band becomes non-negligible. In order to improve the problem, the FSS rasorber was proposed. It is the combination of the absorber and the radome. In this paper, a wideband transmission FSS rasorber is designed, acting as a stealthy radome to reduce the scattering out of band of the antenna system. The rasorber consists of an absorption layer (LayerA) and a transmission layer (LayerT). The LayerA, which use a resistor-loaded in Jerusalem cross element with non-touching centre, provides stable losses out of band and minimizes losses in the band. The LayerT use as the ground plane of an absorber based on the absorption layer within the total reflection band and providing a transmission window in the band. In order to obtain a wideband transmission, two series chokes are inserted in each leg in the LayerA and the LayerT adopts a second-order resonator. Moreover, the elements are packed densely owing to a skewed grid in the LayerA and the miniaturized non-resonant element in the LayerT. Superdense arrays cause a more stable performance of the rasorber, especially the delay of grating lobes onset. The composite structure is thoroughly analyzed by means of the full-wave numerical simulation. The simulation shows that the -1 dB transmission window is 5.7 ~ 6.7 GHz, and the -10dB reflection band is 2.2 ~ 5.1 GHz. The design would be widely used in broadband antenna system.

Enhanced High-gain Antenna Design with Phase-Controlled Frequency Selective Rasorber for LowRCS Performance

A Wideband Transmission Frequency Selective Surface Rasorber

Design of a Wideband Absorption Frequency Selective Rasorber Based on Double Lossy Layers

Low-RCS Transmitarray Using Phase Controllable Absorptive Frequency-Selective Structure

A Wideband Transmission Frequency Selective Surface Rasorber with Low Insertion Loss

Miniaturized Lossy-Layer Scheme For Designing a Frequency Selective Rasorber

Low RCS Transmitarray Using Phase Controllabe Rasorber

Ultrabroadband RCS Reduction and Gain Enhancement of Patch Antennas by Phase Gradient Metasurfaces

An Integrated Antenna Array With Broadband, Low-RCS, and High-Gain Characteristics

A High-Gain, Low Rcs And Dual-Frequency Microstrip Antenna Using Frequency Selective Surface

A New Design Approach for CMT-based Low RCS Metasurface and Antenna

Ultralow Scattering and Broadband Metasurface Using Phase Adjustable FSS Elements Embedded With Lumped Resistors

Gain Enhanced Circularly Polarized Antenna with RCS Reduction Based on Metasurface

Low-RCS Reflectarray Antenna Based on Frequency Selective Rasorber

Low-RCS Holographic Antenna with Enhanced Gain Based on Frequency-Selective Absorber

A Low Radar Cross Section and Low Profile Antenna Co-Designed with Absorbent Frequency Selective Radome

Novel Low-RCS Circularly Polarized Antenna Arrays via Frequency-Selective Absorber

Low-RCS Reflectarray with Phase Controllable Absorptive Frequency-Selective Reflector

Wideband low-RCS and gain-enhanced antenna using frequency selective absorber based on patterned graphene

A High-Gain Circularly Polarized Fabry–Perot Antenna with Wideband Low-RCS Property

A Dual-Polarized C-X-Ku-Band Frequency-Selective Rasorber with Wide High-Transmission Passband