Abstract:Decades ago, the losses of glasses in the near infrared (near-IR) were investigated in views of developments for optical telecommunications. Today, properties in the mid-infrared (mid-IR) are of interest for molecular spectroscopy applications. In particular, high-sensitivity spectroscopic techniques based on high-finesse mid-IR cavities hold high promise for medical applications. Due to exceptional purity and low losses, whispering gallery mode microresonators based on polished alkaline earth metal fluoride crystals (i.e the $\mathrm{XF_2}$ family, where X $=$ Ca, Mg, Ba, Sr,...) have attained ultra-high quality (Q) factor resonances (Q$>$10$^{8}$) in the near-IR and visible spectral ranges. Here we report for the first time ultra-high Q factors in the mid-IR using crystalline microresonators. Using an uncoated chalcogenide (ChG) tapered fiber, light from a continuous wave quantum cascade laser (QCL) is efficiently coupled to several crystalline microresonators at 4.4 $\mu$m wavelength. We measure the optical Q factor of fluoride crystals in the mid-IR using cavity ringdown technique. We observe that $\mathrm{MgF_2}$ microresonators feature quality factors that are very close to the fundamental absorption limit, as caused by the crystal's multiphonon absorption (Q$\sim$10$^{7}$), in contrast to near-IR measurements far away from these fundamental limits. Due to lower multiphonon absorption in $\mathrm{BaF_2}$ and $\mathrm{SrF_2}$, we show that ultra-high quality factors of Q $\geqslant$ 1.4 $\times 10^{8}$ can be reached at 4.4 $\mu$m. This corresponds to an optical finesse of $\mathcal{F}>$4$\cdot$ 10$^{4}$, the highest value achieved for any type of mid-IR resonator to date, and a more than 10-fold improvement over the state-of-the-art. Such compact ultra-high Q crystalline microresonators provide a route for narrow linewidth frequency-stabilized QCL or mid-IR Kerr comb generation.

Ultrahigh-Q crystalline microresonator fabrication with only precision machining

Femtosecond Laser Direct Writing of High-Q Microresonators in Glass and Crystals

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Ultra-high-Q Microcavities Fabricated on Fused Silica Chips by Three-Dimensional Femtosecond Laser Microfabrication

Fabrication of Microresonators of High Q/V Ratios Using Femtosecond Laser Micromachining

Fabrication of High-Q Crystalline Microresonators by Femtosecond Laser Direct Writing for Phase Matched Second Harmonic Generation

Fabrication of an Ultra-High Quality MgF2 Micro-Resonator for a Single Soliton Comb Generation.

High-Q and highly reproducible microdisks and microlasers.

Fabrication And Packaging For High-Q Caf2 Crystalline Resonators With Modal Modification

Reducing Intrinsic Energy Dissipation in Diamond-on-diamond Mechanical Resonators Toward One Million Quality Factor

Fabrication of Ultra-High Q Silica Microdisk Using Chemo-Mechanical Polishing

Dry-etched Ultrahigh-Q Silica Microdisk Resonators on a Silicon Chip

Integrated Ultra-High-Q Optical Resonator

Research on a Micro-Processing Technology for Fabricating Complex Structures in Single-Crystal Quartz

An Integrated Ultra-High-Q Resonator for Optical Clocks, Synthesizers, Gyroscopes and Spectroscopy

Fabrication of an integrated high-quality-factor (high-Q) optofluidic sensor by femtosecond laser micromachining

Ultrafast Laser in Fabrication of Micro Hemispherical Resonators with Quality Factor over Millions

Ultra-coherent nanomechanical resonators based on inverse design

Fabrication of a microtoroidal resonator with picometer precise resonant wavelength.

Mid-Infrared ultra-high-Q resonators based on fluoride crystalline materials