Abstract:The effect of activation energy on phase transformations (transitions) in the W–C system during the synthesis induced by an external heat source was investigated by electrothermal explosion (ETE) under pressure. The ETE technology combines self-propagating high-temperature synthesis (SHS) with additional sample heating by Joule heat – electric current passing through the synthesized mixture, and it makes it possible to determine the chemical reaction rate that is highly susceptible to external impacts such as pressure, concentration, sample shape, any film present on combustion products, etc. The chemical reaction rate, i.e. external source current, may be controlled by changing the activation energy. The study was conducted in the following conditions: temperature Т = 293÷3700 K; carbon concentration of 49.8–50.2 at.%; quasi-static compression at P = 96 MP a ; external source voltage and current density V = 10 V, I = 20 МА/m 2 , respectively; samples 8 mm in diameter weighing 6 g. The Т –τ thermogram of the W–C system was used to determine the following parameters: four stages of the synthesis process, temperatures of special points of phase transformations, temperature boundaries of phases and process activation energy. Thermograms of intermediate states are presented as isothermal plateaus of phase transformations. The analysis of experimental results and the physical representation of the process make it possible to assert that temperature plateau parameters are the effective value of activation energy for synthesis mode maintenance. Each of the 4 W–C mixture synthesis stages is described. Pre-explosion stage I – sample heating in the temperature range of Т = 293÷563К, endothermic reaction, effective activation energy for synthesis mode maintenance Q = 2.96 kJ, and taking into account 1-mole mass Е а = 111.6 kJ/mol. Low-temperature (563–1190 К) stage II – ignition, Q = 5.46 kJ, Е а = 109.2 kJ/mol. High-temperature stage (III) in the range of Т = 1190÷2695К, order–disorder transformation, Q = 14.25 kJ, Е а = 424 kJ/mol. Finally, Stage IV occurs in the range of Т = 2695÷3695К, Q = 14.31 kJ, Е а = 143.2 kJ/mol. It was shown that the limiting stage with the highest activation energy is the melting process.

Exothermic Synthesis of Binary Solid Solutions Based on Hafnium and Zirconium Carbides

PRODUCING METHOD OF HIGH ENTROPY CARBIDE IN AN IONIC MELT

Synthesis of Ultra-High-Temperature Ta4HfC5–HfB2 Composites by Electro-thermal Explosion under Pressure

Synthesis of high-entropy carbides (TiTaNb)xHfyZrzC with strong thermal-oxidative resistant properties by mechanical alloying and spark plasma sintering

Synergistic hardening in a dual phase high‐entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 ultra‐high temperature ceramic

High-Temperature Mass Spectrometric Study of the Vaporization of Oxycarbide MAX Phase Ceramics

High-entropy carbonitride (Hf,Ta,Nb,Zr)(C,N): One step mechanically induced self-sustaining reaction and spark plasma sintering

Machine-learning Driven Synthesis of TiZrNbHfTaC5 High-Entropy Carbide

A Facile Route for the Synthesis of High‐entropy Transition Carbides/borides at Low Temperatures

Combustion Synthesis and Characterization of Ultra-High-Temperature NbB2–HfB2 Solid Solutions

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

In-situ phase evolution of multi-component boride to high-entropy ceramic upon ultra-high temperature ablation

Low-temperature Rapid Synthesis of Ultrafine Hafnium Carbide Ceramic Powders

Ultra-fast high-temperature synthesis and densification of high-entropy diborides and diboride-carbide ceramics

Activation energy of phase transformations at high-temperature synthesis of tungsten carbide by electrothermal explosion under pressure

Incorporation of Metallic Components Into a Structure of Titanium Carbonitride at Ultra-High Load and Temperature of Spark Plasma Sintering and at Different Compaction Pressures During Explosive Method

Reactive Sintering of Dual-Phase High-Entropy Ceramics with Superior Mechanical Properties

Carbothermal Reduction Synthesis of Nanocrystalline Zirconium Carbide and Hafnium Carbide Powders Using Solution-Derived Precursors

High-pressure high-temperature synthesis and thermal equation of state of high-entropy transition metal boride

Features of SHS of multicomponent carbides

Novel refractory high-entropy ceramics: Transition metal carbonitrides with superior ablation resistance