Abstract:Amorphous SiBCN ceramics are a unique class of structure materials with potential applicationsas high-temperature heat-resistant structural components owing to their combination of special structure and properties of low specific weight, high specific strength and excellent damage tolerance at elevated temperatures. However, it is still in need for further mechanical properties improvements for actual demands by rational co-design of architecture and chemistry as well as understanding the basic features of morphological/microstructural evolution and failure behavior. Thus in this attempt, to target the dense amorphous Si2ByC2N (y=1.5～4) monoliths with high mechanical properties, an attractive way of combinatorial mechanical alloying and high-pressure sintering technique (1000 oC/3～5 GPa/30 min) was proposed using elemental powders of graphite, hexagonal BN, cubic Si and boron as raw materials. The sintering pressure induced microstructural evolution, phase transformation and thermal stability have been investigated by XRD, SEM, TEM and TG measurements, and mechanical performance, especially the fracture behavior was also discussed in details. Results clearly presented that an increase in sintering pressure promoted the phase transformation of completely amorphous matrix to a hybrid structure of substantial amorphous phases and few nanocrystals of metal c-Si and/or t-BN(C) for some monoliths, implying boron-content depending phase composition. High-pressure sintering effectively promoted the densification leading to free volume annihilation and the river-like fracture morphology occurrence. A monotonous increase of the bulk density, nano hardness and Young's modulus as a function of the sintering pressure was observed. Under the same sintering conditions, the increase in boron content weakened the mechanical properties and thermal stability of the amorphous Si2ByC2N (y=1.5～4) monoliths. Dense amorphous Si2B1.5C2N monoliths consolidated at 1000 oC/5 GPa/30 min showed the best performance with the bulk density, nano hardness and Young's modulus obtaining at 2.69 g/cm3, 33.6±2.2 GPa and 414.2±16.5 GPa, respectively.

Incorporation of Metallic Components Into a Structure of Titanium Carbonitride at Ultra-High Load and Temperature of Spark Plasma Sintering and at Different Compaction Pressures During Explosive Method

Sintering of c-BC2N, Solid Solutions of Metallic Phases Particles with the Additives of Oxide Components and NiCr at Ultra-High Load and Temperature of Spark-Plasma Sintering, High Compaction Pressure During the Explosive Method

Strengthening and Reinforcing of Ceramic-Metallic Materials by Quaternary Solid Solutions of Metallic Phases During Spark Plasma Sintering

A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics

Crystallization and Microstructural Evolution Process from the Mechanically Alloyed Amorphous SiBCN Powder to the Hot-Pressed Nano SiC/BN(C) Ceramic

Processing and Characterization of SiB0.5C1.5N0.5 Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

Microstructural evolution and mechanical performance of high-pressure sintered dense amorphous SiBCN monoliths

Densification, Microstructure and Mechanical Properties of Multicomponent (tizrhfnbtamo)c Ceramic Prepared by Pressureless Sintering

Microstructure Transformation and Mechanical Properties of TiC–TiB2 Ceramics Prepared by Combustion Synthesis in High Gravity Field

The impact of Si3N4 incorporation on the mechanical characteristics of ZrB2-SiC nanocomposite sintered via pressureless method

Microstructures and Mechanical Properties of ZrB2–SiC–Ni Ceramic Composites Prepared by Spark Plasma Sintering

Microstructures and Toughening of TiC-TiB2Ceramic Composites with Cr-Based Alloy Phase Prepared by Combustion Synthesis in High-Gravity Field

Mechanical Properties and In-Situ Toughening Mechanism of Pressurelessly Densified ZrB2–TiB2 Ceramic Composites

Microstructure and high-temperature properties of SI-B-C-N MA-powders and ceramic

Microstructure and Performance of Solidified TiB2TiC Composites Prepared by High Pressure and High Temperature

Characterization of Ceramic Microstructure and Nanoindentation under Different Loads

Effect of Sintering Temperature and Yttrium Composition on the Densification, Microstructure and Mechanical Properties of Spark Plasma Sintered Silicon Nitride Ceramics with Al2O3 and Y2O3 Additives

Production of silicon carbide reinforced molybdenum disilicide composites using high-pressure sintering

Ultrafast synthesis and pressureless densification of multicomponent nitride and carbonitride ceramics

Microstructure Evolution of Diboride and Carbide Phases in Platelets-Toughened (zr, Ti)C-(Ti, Zr)B2 Ceramics Via Reaction Pressureless Sintering

Composite Nitride Nanoceramics in the System Titanium Nitride (TiN)-Aluminum Nitride (AlN) through High Pressure and High Temperature Sintering of Synthesis-Mixed Nanocrystalline Powders