Abstract:h-BN-ZrO2-SiC multiphase ceramics were prepared rapidly by spark plasma sintering (SPS) with h-BN, ZrO2 and SiC powders as raw materials and 8% (Al2O3+Y2O3) as sintering aids. The effects of nano SiC content on the densification, microstructure and mechanical properties of h-BN-ZrO2-SiC multiphase ceramics were investigated. The results show that the addition of nano SiC particles can effectively promote the sintering and increase density and mechanical properties of the sintered samples at a low sintering temperature. The flexural strength, fracture toughness and elastic modulus all increase with the content increase of nano SiC, especially, the increment of the elastic modulus is obvious. The comparison of all results shows that the sample with the SiC content of 25% has optimal mechanical properties, and the flexural strength, fracture toughness and elastic modulus are 268.4 MPa, 3.24 MPa.m(1/2) and 115 GPa, respectively. It is mainly because the nano SiC particles can better play a gap filling, dispersion strengthening and grain boundary pinning effect than ZrO2, which are beneficial to improve the bonding strength between the phases and reduce the residual stress due to thermal mismatch. As a result, more fracture energy is absorbed during the crack propagation process, and the flexural strength and fracture toughness increase.

Microstructures and Mechanical Properties of ZrB2–SiC–Ni Ceramic Composites Prepared by Spark Plasma Sintering

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Microstructure, mechanical properties and thermal shock behavior of h-BN-SiC ceramic composites prepared by spark plasma sintering

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Preparation and Characterization of ZrB 2 -Sic Ultra-High Temperature Ceramics by Microwave Sintering

Preparation and flame ablation/oxidation behavior of ZrB2/SiC ultra-high temperature ceramic composites

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

The impact of Si3N4 incorporation on the mechanical characteristics of ZrB2-SiC nanocomposite sintered via pressureless method

Fabrication and mechanical properties of ZrB2–SiCw ceramic matrix composite

Ultrahigh‐temperature tensile behaviors of ZrB2–SiC ceramics

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

High-temperature mechanical properties of ZrB2/SiC/Si3N4 ceramic tool materials with dual composite architectures

Temperature‐dependent mechanical and oxidation behavior of in‐situ formed ZrN/ZrO2‐containing Si3N4‐based composite

The Fabrication and Mechanical Properties of SiC/ZrB2 Laminated Ceramic Composite Prepared by Spark Plasma Sintering

Microstructure and mechanical properties of SiC composite ceramics modified by (TixZr1–x)B2 solid solution

Characterization of Ceramic Microstructure and Nanoindentation under Different Loads

Effect of carbon nanotube on processing, microstructural, mechanical and ablation behavior of ZrB2-20SiC based ultra-high temperature ceramic composites