Abstract:The article shows the effect of mixtures of metal powders of Ti, Nb, Cr, Zr and Ti, Mo, Cr, V, as well as Mo, Nb, Cr, and Ta during spark plasma sintering of compositions at a pressing load of 85 MPa in the range of 1200 – 1600°C on the phase composition, microstructure, grains sizes of crystalline phases, relative density, linear shrinkage, physico-mechanical properties, linear correlation, values of standard deviations of the modulus of elasticity and fracture toughness of mullite–(Ti,Ta)(C,N)–B 4 C– c -BN samples. Synthesized powders of TiC, TiN, B 4 C, and h -BN are characterized by different intensity of crystallization of TiC, TiN, B 4 C, and h -BN phases, respectively. Spark-plasma sintered solid solution of (Ti,Ta)(C,N) shows intensive crystallization of the (Ti,Ta)(C,N) phase at 1500°C, as well as crystalline, uniform, and densely sintered microstructure. Sintered samples with the mixtures of metal powders show similar mullitization and crystallization of the (Ti,Ta)(C,N), B 4 C, and c -BN phases with different evolution of the crystalline β-Ti, Nb, Cr, Zr, β -Ti, Mo, Cr, V, and β -Mo, Nb, Cr, Ta phases in the range of 1200 – 1600°C. The microstructures of sintered samples are crystalline, variously uniform and variously densely sintered. The samples with mixtures of metal powders form variously dispersed granular compositions of crystalline phases in the range of 1200 – 1600°C, different uniformity, density, path, width of boundary layers of solid solutions of metallic phases, different packing of particles of non-oxide and solid solutions of metallic phases, have different path and width of propagating microcracks at the boundaries of ceramic particles and particles of solid solutions of metallic phases at 1300 and 1500°C, as well as across the boundary layers of solid solutions of metallic phases at 1500°C. This differently affects the ingrowth and values of physico-mechanical properties, crack resistance linear correlation, values of standard deviations of the modulus of elasticity and fracture toughness in the range of 1200 – 1600°C.

Strengthening and Reinforcing of Ceramic-Metallic Materials by Quaternary Solid Solutions of Metallic Phases During Spark Plasma Sintering

Incorporation of Metallic Components Into a Structure of Titanium Carbonitride at Ultra-High Load and Temperature of Spark Plasma Sintering and at Different Compaction Pressures During Explosive Method

Sintering of c-BC2N, Solid Solutions of Metallic Phases Particles with the Additives of Oxide Components and NiCr at Ultra-High Load and Temperature of Spark-Plasma Sintering, High Compaction Pressure During the Explosive Method

Microstructure and mechanical properties of the spark plasma sintered Ta2C ceramics

Spark Plasma Sintering of Ceramic Matrix Composite of ZrB2 and TiB2: Microstructure, Densification, and Mechanical Properties—A Review

A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics

The spark plasma sintering of fine grained TiCN-Mo-Ni cermets

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

Formation of solid solution structures in (Ti,W,Ta,Mo)(C,N) cermet via spark plasma sintering

Microstructures and mechanical properties of TiB2 composite ceramics with co-addition of Ti and TiC fabricated by SPS

Microstructure and Mechanical Properties of Spark Plasma Sintered TaC0.7 Ceramics

Preparation of Ti-45Al-5.5(Cr,Nb,B,Ta) Alloy by Mechanical Milling and Spark Plasma Sintering

Microstructure and Mechanical Properties of the Spark Plasma Sintered Tac/Sic Composites: Effects of Sintering Temperatures

β→α Phase Transformation and Properties of Solid-State-Sintered SiC Ceramics with TaC Addition

Synthesis, microstructure, and properties of high purity Mo2TiAlC2 ceramics fabricated by spark plasma sintering

Densification, Microstructures, and Mechanical Properties of (zr, Ti)(C, N) Ceramics Fabricated by Spark Plasma Sintering

Synthesis, Microstructure and Mechanical Properties of a MoAlB Ceramic Prepared by Spark Plasma Sintering from Elemental Powders

Effect of NiTi content on the mechanical properties and microstructure of TiB2–TiN-based composite ceramic material prepared using spark plasma sintering

Microstructure and strengthening mechanism of Mo@Ni reinforcement (W,Ti)C cermet via spark plasma sintering

Synthesis and Properties of an Ultrafine Grained Ti-45al-2cr-2nb-1b-0.5ta Alloy Prepared by Double Mechanical Milling and Spark Plasma Sintering

Densification, Microstructure and Mechanical Properties of Multicomponent (tizrhfnbtamo)c Ceramic Prepared by Pressureless Sintering