Abstract:The effect of activation energy on phase transformations (transitions) in the W–C system during the synthesis induced by an external heat source was investigated by electrothermal explosion (ETE) under pressure. The ETE technology combines self-propagating high-temperature synthesis (SHS) with additional sample heating by Joule heat – electric current passing through the synthesized mixture, and it makes it possible to determine the chemical reaction rate that is highly susceptible to external impacts such as pressure, concentration, sample shape, any film present on combustion products, etc. The chemical reaction rate, i.e. external source current, may be controlled by changing the activation energy. The study was conducted in the following conditions: temperature Т = 293÷3700 K; carbon concentration of 49.8–50.2 at.%; quasi-static compression at P = 96 MP a ; external source voltage and current density V = 10 V, I = 20 МА/m 2 , respectively; samples 8 mm in diameter weighing 6 g. The Т –τ thermogram of the W–C system was used to determine the following parameters: four stages of the synthesis process, temperatures of special points of phase transformations, temperature boundaries of phases and process activation energy. Thermograms of intermediate states are presented as isothermal plateaus of phase transformations. The analysis of experimental results and the physical representation of the process make it possible to assert that temperature plateau parameters are the effective value of activation energy for synthesis mode maintenance. Each of the 4 W–C mixture synthesis stages is described. Pre-explosion stage I – sample heating in the temperature range of Т = 293÷563К, endothermic reaction, effective activation energy for synthesis mode maintenance Q = 2.96 kJ, and taking into account 1-mole mass Е а = 111.6 kJ/mol. Low-temperature (563–1190 К) stage II – ignition, Q = 5.46 kJ, Е а = 109.2 kJ/mol. High-temperature stage (III) in the range of Т = 1190÷2695К, order–disorder transformation, Q = 14.25 kJ, Е а = 424 kJ/mol. Finally, Stage IV occurs in the range of Т = 2695÷3695К, Q = 14.31 kJ, Е а = 143.2 kJ/mol. It was shown that the limiting stage with the highest activation energy is the melting process.

Synthesis of Ultra-High-Temperature Ta4HfC5–HfB2 Composites by Electro-thermal Explosion under Pressure

Exothermic Synthesis of Binary Solid Solutions Based on Hafnium and Zirconium Carbides

Self-Propagating High-Temperature Synthesis Pressing of Composites Based on the TiB2–B4C–Al System

Tungsten Carbide by Electrothermal Explosion under Pressure: Accompanying Phase Transformations

Self-Propagating High-Temperature Synthesis of Layered Composite Ti/Hf/Ta/Ni/Ceramics Materials

Production and Properties of B4C–TiB2 Composites with Isotropic Eutectic Microstructure

Synthesis and Performance of TiB2–B4C Composites by High Pressure of TiC–B Mixture

Microstructure and Performance of Solidified TiB2TiC Composites Prepared by High Pressure and High Temperature

Synthesis of high-entropy carbides (TiTaNb)xHfyZrzC with strong thermal-oxidative resistant properties by mechanical alloying and spark plasma sintering

Activation energy of phase transformations at high-temperature synthesis of tungsten carbide by electrothermal explosion under pressure

The Structure and Properties of the Promising Ultra-High-Temperature HfB2–HfC–SiC Ceramics Obtained from Heterophase SHS Powders

Self-propagating high temperature combustion synthesis of TiB/Ti composites

Elasticity, mechanical and thermal properties of polycrystalline hafnium carbide and tantalum carbide at high pressure

PRODUCING METHOD OF HIGH ENTROPY CARBIDE IN AN IONIC MELT

TiB₂-Based Composites for Ultra-High-Temperature Devices, Fabricated by SHS, Combining Strong and Weak Exothermic Reactions

Recent advances in synthesis of ultra-high temperature ceramic matrix composites

Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites

High-pressure high-temperature synthesis and thermal equation of state of high-entropy transition metal boride

Combustion Synthesis and Characterization of Ultra-High-Temperature NbB2–HfB2 Solid Solutions

Facile Electrochemical Preparation of Nano-sized Ultra-high-temperature Ta1-xHfxC Ceramic Powders

Synergistic hardening in a dual phase high‐entropy (Hf,Nb,Ta,Ti,Zr)C–(Hf,Nb,Ta,Ti,Zr)B2 ultra‐high temperature ceramic